8N3SV76EC-0037CDI

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

At its simplest, 8N3SV76EC-0037CDI is a programmable timer or oscillator designed to provide a reliable source of periodic pulses. By utilizing a range of on-chip features such as PLL frequency synthesis and a programmable dual-clock output, this device can be used for a variety of timing and clocking applications. This article will provide an overview of the application field and working principle of the 8N3SV76EC-0037CDI.

The 8N3SV76EC-0037CDI is ideally suited to any application requiring a programmable clock oscillator with low power consumption and high accuracy. One example of this is mobile and portable applications, such as cell phones and tablets, where limited power and size constraints demand a device which can provide a reliable, low-cost, low-noise solution. The 8N3SV76EC-0037CDI is also suitable for use in expensive, time-critical applications such as financial, industrial, and medical equipment where accurate timing is essential.

The 8N3SV76EC-0037CDI features an on-chip phase-locked loop (PLL) that enables programmable synthesis of standard frequencies from 8 kHz to 20 MHz. The device also supports two separate output clocks, each of which can be programmed independently to either output a fixed frequency or to switch between two selectable frequencies. Furthermore, the device features an integrated power management unit, which provides low-power consumption during idle periods, enabling it to be used in battery-powered applications.

In terms of its physical size, the 8N3SV76EC-0037CDI has on-board ball pitch of 0.8mm, allowing it to be integrated into compact applications. It also includes both a power supply and ground connection, with the power supply range being 3.135V to 3.465V. The supply current (Icc) is typically equal to ___%% (.___ mA) and the maximum input current is 7.8mA.

In terms of its power requirements, the 8N3SV76EC-0037CDI features an adjustable clock from 8 kHz to 20MHz and a selectable 0.8V fast start-up option. It also features an advanced power management system, which allows users to shut down the device for power saving when it is not in use. Additionally, the device features a maximum Enable/Disable cycle time of 2 clock cycles, making it one of the fastest programmable timers available.

The 8N3SV76EC-0037CDI working principle is based on its integrated phase-locked loop (PLL) design. The PLL is used to synthesise standard frequency outputs, ranging from 8 kHz to 20 MHz, by multiplying and dividing the base frequency. The synthesised clock is then fed to one of the two outputs, depending on the user-defined configuration. The device also allows users to select between two output frequencies, enabling flexible frequency choice.

The 8N3SV76EC-0037CDI is a versatile programmable timer/oscillator which can be used in a range of applications. Its integrated PLL and on-board power management capabilities make it ideal for use in mobile, portable, and time-critical applications, while its wide range of selectable frequencies and fast start-up time make it an efficient and reliable source of periodic pulses. As a result, this device is well suited for any application where accurate timing is of critical importance.

The specific data is subject to PDF, and the above content is for reference