8N3SV76FC-0085CDI8

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Programmable timers and oscillators are clock/timing components that provide a signal at either periodic intervals or in response to certain events. 8N3SV76FC-0085CDI8 is a programmable timer and oscillator from the 8N3 series of 8-bit micro-interpolated digital delay generators from IDT. This part has two independent channels, both of which can be programmed for either a periodic pulse or a pulse-width modulation output. The devices are suitable for many time-based industrial control, automation and medical applications.

8N3SV76FC-0085CDI8 has a wide range of programmable features. The device can be programmed to generate a pulse on its output at any desired frequency within its specified range, which is from 0.05 Hz to 200 KHz, with 256 programmable delay steps. The timing resolution of the pulse is also programmable being from 1usec to 1msec for the two channels. The device also features programmable pulse widths and rail to rail output voltages. In addition to these, there are eight different modes of operation including a repetition counter mode, a non-skipping pulse mode, a modulated pulse mode, a timer mode and a gated interval timer mode.

The basic working principle of the 8N3SV76FC-0085CDI8 is as an 8-bit micro-interpolated delay generator that can generate an output pulse at any programmed frequency with a resolution of 1 microsecond. It is based on a digital time-delay-line logic and a PMOS-based oscillator. The logic consists of a set of counters, multiplexers and decoders. The PMOS oscillator consists of two matched PMOS transistors and several resistors. The oscillator frequency is determined by the capacitance of the PMOS transistor pair and the values of the resistors. The 8N3SV76FC-0085CDI8 can be used for many applications such as network timing for computers, as a clock source for systems clocks, for timing applications in control and automation systems, for embedded systems and for medical applications that require precision timing.

In conclusion, 8N3SV76FC-0085CDI8 is a highly programmable timer and oscillator from IDT\'s 8N3 series. It can be used in many applications where precise timing accuracy is required. This device is suitable for time-based industrial control, automation and medical applications. It has a wide range of programmable features including frequency, pulse width and rail to rail output voltages. Its basic working principle is as an 8-bit micro-interpolated delay generator that can generate an output pulse at any programmed frequency with a resolution of 1 microsecond.

The specific data is subject to PDF, and the above content is for reference