8N3SV76FC-0136CDI8

Series:	FemtoClock® NG
Packaging:	Tape & Reel (TR)
Part Status:	Active
Type:	VCXO
Count:	--
Frequency:	100MHz
Voltage - Supply:	2.375 V ~ 2.625 V
Current - Supply:	120mA
Operating Temperature:	-40°C ~ 85°C
Package / Case:	6-CLCC
Supplier Device Package:	6-CLCC (7x5)
Mounting Type:	Surface Mount
Base Part Number:	IDT8N3SV76FC

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction
Programmable timers and oscillators are widely used for variety of control and time-measuring applications. The 8N3SV76FC-0136CDI8 is a type of programmable timer and oscillator that is well known in the industry. This article will provide an overview of the application fields and working principles of 8N3SV76FC-0136CDI8.
Application Fields
8N3SV76FC-0136CDI8 has a wide range of application fields. They have been used in temperature controllers, temperature and humidity controllers, instrumentation controllers, dust monitors, gas analyzers, and many other similar applications. They are also used in robots, space exploration, railway signaling and control, and automotive electronics. Furthermore, they can also be found in military equipment, fire protection systems, and medical instruments.
Working Principles
The 8N3SV76FC-0136CDI8 is based on the RTC (Real Time Clock) principle. The transmitted signal can be accurately measured by the use of hardware and software. The design of the integrated circuit matches the accuracy requirements of its applications. It can accurately distinguish the signals and perform certain functions.The integrated circuit is composed of two main blocks, an oscillator and a counter/divider. It utilises an external crystal as its primary input source, which works in conjunction with an internal oscillator to produce an accurate signal. This signal is further divided by the internal counter/divider to produce a square wave signal with a constant frequency.The 8N3SV76FC-0136CDI8 is designed with a single I/O line for clock data output. The observed output voltage can be determined by the input voltage and the low frequency count of the programmed on-board oscillator/counter. The user can also adjust the output frequency via programming, allowing for an unprecedented level of control.To use the 8N3SV76FC-0136CDI8 in the application, the user must first program the internal counter/divider to match the desired frequency of operation. This is done by setting the low-frequency count via a software control interface. The device can also be programmed to either produce a continuous square wave signal or a single-shot pulse signal.
Conclusion
The 8N3SV76FC-0136CDI8 is a type of programmable timer and oscillator. It is based on the RTC (Real Time Clock) principle and is composed of two main blocks, an oscillator and a counter/divider. It is designedfor applications in temperature controllers and humidity controllers, instrumentation controllers, robots, space exploration, railway signaling and control, and automotive electronics. It is also recommended for use in military equipment, fire protection systems, and medical instruments. The 8N3SV76FC-0136CDI8 is user programmable, allowing for frequency adjustment and a wide range of output signal configuration.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description