8N3SV76LC-0029CDI

Series:	FemtoClock® NG
Packaging:	Tray
Part Status:	Active
Type:	VCXO
Count:	--
Frequency:	155.52MHz
Voltage - Supply:	2.375 V ~ 2.625 V
Current - Supply:	120mA
Operating Temperature:	-40°C ~ 85°C
Package / Case:	6-CLCC
Supplier Device Package:	6-CLCC (7x5)
Mounting Type:	Surface Mount
Base Part Number:	IDT8N3SV76LC

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction and Overview

Programmable timers and oscillators are useful devices for managing time and frequency in many applications. The 8N3SV76LC-0029CDI is a device that falls into this category. It is a 3 DIP device that can be used for frequency distribution and generation. This device can also be used to act as a frequency synthesizer or a voltage controlled oscillator (VCO).

Function and Applications Field

The 8N3SV76LC-0029CDI is a versatile timer and oscillator with various functions and application fields. It is a three-pin device with a single-ended 1.8V to 3.3V input voltage. It has the capability of being programmed using three pins: CLK, SDCLK, and CMOS. It has a dual-line output (SD and SN).The primary function of the 8N3SV76LC-0029CDI is to generate a stable square wave signal. This signal can be used in many different applications such as control circuits, signal processing, and frequency distribution. It can also be used as a frequency synthesizer for generating stable frequencies.The device can also be used as a voltage controlled oscillator (VCO). This function allows the device to generate a signal that is responsive to input voltage. This can be used in specialized scenarios such as motor control, audio applications, robotics, and noise cancellation.

Working Principle

The 8N3SV76LC-0029CDI is a programmable timer and oscillator that uses various signals to produce a stable square wave signal. The CLK pin is used to provide a square wave that is used to set the frequency of the output signal. The SDCLK pin is used to program the duty cycle of the output signal. Finally, the CMOS pin is used to program the amplitude of the signal.The output signal is a square wave with the frequency and duty cycle being set the CLK and SDCLK pins respectively. The amplitude is set through the CMOS pin. The frequency can be varied from 6Hz to 100kHz and the duty cycle from 0% to 100%.

Conclusion

The 8N3SV76LC-0029CDI is a versatile programmable timer and oscillator that can be used for a wide range of applications. It can be used to generate frequency signals or act as a voltage controlled oscillator. It is a three-pin device with an adjustable single-ended 1.8V to 3.3V input voltage that can provide a square wave output with adjustable frequency, duty cycle, and amplitude.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description