8N3SV76LC-0083CDI

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

What is 8N3SV76LC-0083CDI?

8N3SV76LC-0083CDI is a low-cost, highly programmable piezoelectric oscillator from Renesas Technology. This device has been developed for timing, clock and other control applications to achieve extremely accurate timing accuracy and extremely low power consumption. The 8N3SV76LC-0083CDI offers two basic designs for two distinct types of applications; a classic monolithic quartz crystal oscillator or a metallic electrostatic memory device.

Clock/Timing - Programmable Timers and Oscillators

The 8N3SV76LC-0083CDI can be used as a timer or oscillator in a wide range of timing, clock, and control applications. For example, it can be used to time the rotation of motor shafts, to control the speed of pumps, to provide an accurate time reference for a clock system, or to measure time intervals in special processing systems. In addition, it can provide a standard pulse width modulated signal to an input or output device. The 8N3SV76LC-0083CDI offers a maximum frequency output of 25 MHz, with a minimum frequency accuracy of 0.02%.

The 8N3SV76LC-0083CDI\'s design allows for the device to be programmed for a variety of operating parameters. It can be set to either day or night mode for different applications. It can also be programmed for a variety of frequency outputs, ranging from 0.4 MHZ to 250 GHz, with 0.1 KHz step resolution. The device also offers programmable modes such as continuous or single-sided cycle, periodic or pulse mode. Additionally, the device can be programmed for up to three separate operating phases, and can run in either square wave or triangular wave mode.

Working Principle

The 8N3SV76LC-0083CDI utilizes an innovative piezoelectric MEMS technology. This involves a series of electrodes, arranged in a lattice, mounted on a thin substrate. To start the oscillation cycle, the electrodes are charged to a specified voltage and then released in a precise order. As the electrodes are released, the substrate vibrates, generating an electrical signal that is amplified and then sent out of the device.

The output frequency of the 8N3SV76LC-0083CDI is determined by the frequency of the substrate vibrations. To program the device, the user can adjust the voltage of the electrodes, the speed of their release, and the phase of their release, allowing for fine-tuning of the output frequency. The 8N3SV76LC-0083CDI is also designed to be extremely accurate with a frequency drift of the order of only 0.02%.

Conclusion

The 8N3SV76LC-0083CDI is a highly programmable and cost-effective timing device suitable for a wide range of timing and clock control applications. It utilizes a MEMS technology with a number of adjustable parameters to provide a precise output frequency. In addition, the device offers low power consumption and extremely fine frequency accuracy of the order of only 0.02%.

The specific data is subject to PDF, and the above content is for reference