8N3SV76LC-0130CDI

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 8N3SV76LC-0130CDI is a programmable timer/oscillator that functions as a combination clock generator and clock buffer device. The device operates with an input voltage (VCC) range from 1.4V to 3.6V and a power-down standby current less than 1 μA. It is designed to be used in a variety of applications, such as digital cameras, digital video recorders, personal media players, MP3 players, PDAs, and many other embedded consumer applications that require a reliable, low-jitter clock source.

The 8N3SV76LC-0130CDI offers several operating modes and programmable frequency ranges, including a crystal oscillator, a crystal oscillator with a frequency divider, and a programmable oscillator with an optional programmable frequency divider. The device also offers a wide range of frequencies and clock output formats, and it also provides a programmable Master/Slave jumper selection and an onboard feedback resistor for single-ended (SE) mode and dual-ended (DE) mode operation.

The 8N3SV76LC-0130CDI features dedicated programming pins and a 6MP CMOS image processor interface for programming the device. Additionally, the device offers a wide variety of output formats, such as LVTTL and LVCMOS, and its on-chip feedback resistors support single-ended (SE) and dual-ended (DE) operation.

The 8N3SV76LC-0130CDI also features a fast-slew-rate output that helps to reduce the overall power consumption, a programmable output-enable pin for turning the output off, and a programmable output-enable pin for triggering the output on. The output frequency can be programmed up to 20 MHz, and the device includes on-chip phase-lock loop (PLL) circuit for generating a wide range of frequency outputs.

When in operation, the 8N3SV76LC-0130CDI clock generator generates a highly stable clock output, with extremely low jitter. The device is designed to minimize sub-harmonic oscillations, and it also features a programmable skew between two outputs to minimize jitter in applications requiring multiple frequency outputs. This device is an ideal solution for providing timing information and synchronization in embedded consumer applications.

In conclusion, the 8N3SV76LC-0130CDI is a programmable timer/oscillator that functions as a combination clock generator and clock buffer device. It is designed for a wide range of applications and provides a reliable, low-jitter clock source. The device supports a wide range of frequencies and clock output formats, offers a selection of operating modes, and features on-chip phase-lock loop (PLL) circuitry. With its fast-slew-rate output and programmable output-enable pins, the 8N3SV76LC-0130CDI provides an ideal solution for embedded consumer applications that require accurate timing information and synchronization.

The specific data is subject to PDF, and the above content is for reference