8N4DV85BC-0163CDI8

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 8N4DV85BC-0163CDI8 is a programmable programmable timer and oscillator that is well-known for its many uses. It has been used in consumer electronics, communications, industrial, and military domains for nearly two decades.

This device has earned a reputation as a reliable timekeeping solution with its ability to cycle through a range of time intervals and repeat them accurately. It is capable of programming custom periods ranging from 30 minutes of a fraction of a second – measured in microseconds – with a maximum accuracy of 0.05%. The 8N4DV85BC-0163CDI8 can be used in many applications such as time-delay relays, time-delay switching, precision time-base equipment, industrial timing applications, and time-controlled automatic devices.

The 8N4DV85BC-0163CDI8 uses an external crystal or ceramic resonator for its timekeeping oscillator. This oscillator runs at a high frequency typically in a range from 16MHz to 160MHz, which determines the accuracy of the programmable timer. A fixed RC network is also used to generate a running voltage, which is used to drive the internal counter that keeps track of time. The RC network also works to maintain the accuracy of the timer when the oscillator frequency changes due to external noise or temperature changes.

The 8N4DV85BC-0163CDI8 can be programmed for several operating modes, such as one-shot, cyclic, and multi-cycle. In one-shot operation, the timer counts the programmed time once and terminates itself. In cyclic operation, the timer counts the programmed time and resets to a predetermined count value. In multi-cycle operation, the timer can count the programmed time and generate an output every N cycles. In addition, the timer can be programmed for burst/hold-conditions to initiate an output for a specific duration.

When programming the 8N4DV85BC-0163CDI8, users can combine the abilities of the timer with other components using logic circuit functions to customize the timing sequence. This flexibility allows the timer to act as a bridge between slow process variables and programmable logic controllers (PLCs). It can also be used to control the start, stop, and monitor industrial process control.

Additionally, the 8N4DV85BC-0163CDI8 is designed to minimize power consumption with its low-power standby current. This helps to keep overall power requirements of the device to a minimum, which is a key factor in many modern industrial applications. The low power requirement also helps to stabilize the accuracy of the programmable timer and oscillator, which is dependent on the stability of the clock source.

In short, the 8N4DV85BC-0163CDI8 programmable timer and oscillator is an excellent solution for many timing-related applications. It offers flexibility, accuracy, and low power consumption to ensure reliable and dependable performance. Its wide range of programming options and modes give it the flexibility to be configured in a variety of applications.

The specific data is subject to PDF, and the above content is for reference