8N4DV85FC-0092CDI

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 8N4DV85FC-0092CDI is a programmable timer and oscillator in the clock/timing category. It has a wide range of applications in the electronics industry and is used in many areas. It is designed to provide accurate timing and oscillation frequencies, and can be programmed to operate in specific modes and configurations. The combination of programmability and accurate timing makes the unit ideal for applications where precise timing is critical.

The 8N4DV85FC-0092CDI operates on a voltage level of 5V with a current consumption of 3.5mA. It employs a 32-bit microcontroller and uses a PCM-type programmable logic device for its logic operations. The device contains an internal timer, a 16-bit counter, a 24-bit data register, and a 16-bit control register. All these components enable the device to measure and process signals accurately and accurately reproduce timing signals in precise intervals. The 8N4DV85FC-0092CDI can be programmed to operate in various modes.

The different modes in which the 8N4DV85FC-0092CDI can be used are as follows:

• One-shot Mode: This is a single-shot timer mode. In this mode, the timer is activated when the first signal is detected and turns off after the programmed period of time is elapsed. This mode is useful for applications that require precise timing of events.
• Free-running Mode: In this mode, the device continuously cycles through its programmed time interval. This mode can be used for applications such as lighting, automation, and motor control.
• Pulse Width Modulation (PWM) Mode: In this mode, the timer outputs a pulse train that varies in width. This can be used to control the speed of motors and to control the brightness of lights.
• Frequency Counter Mode: This mode allows the device to measure the frequency of an input signal. This can be used for measuring the frequency of vibration in machinery, and can be used to detect faults in machinery.
• Analog-to-Digital Converter (ADC) Mode: This mode converts analog signals into digital form. This can be used to measure the temperature, pressure, and other physical conditions.

The 8N4DV85FC-0092CDI also has an on-board oscillator that can be programmed to oscillate with a frequency ranging from 0 to 500 kHz. The oscillator can be used for applications that require precise timing. For example, the oscillator can be used to drive clocks, or to synchronize the operations of several microprocessors.

The 8N4DV85FC-0092CDI is a versatile programmable timer and oscillator. It can be used in a wide range of applications, including lighting, motor control, automation, frequency counting, and ADC. The device is designed to provide precise timing and oscillatory frequencies, making it an ideal choice for applications where precise timing is required.

The specific data is subject to PDF, and the above content is for reference