8N4Q001EG-0054CDI

8N4Q001EG-0054CDI is an application field and working principle of a programmable timer and oscillator. It is a dual-channel programmable clock/timing controller, used in a large variety of applications where reliable operation and stability of timing measurements is essential.The device utilizes a high-precision oscillator circuit, enabled by a quartz crystal, and the latest active loop stabilization technology. This combinatorial approach delivers exceptional accuracy that can be relied upon in the harshest of environments.

In a typical application, the 8N4Q001EG-0054CDI contains two channels of individually-programmable content, including amplitude, frequency, duty cycle and phase. The user can choose the desired settings via an on-board mini-DIP switch or via a menu-driven software interface. The channels can be used for either controlling the timing of specific tasks or for creating and maintaining a stable clock frequency, depending on the application.

The timing diagrams of the 8N4Q001EG-0054CDI are generated by utilizing a pulse-width modulated (PWM) signal with a delta-sigma control loop. This gives the user control over the duty cycle and phase, providing a greater range of flexibility. The output is programmable, either via the mini-DIP switch or via software-defined parameters. This allows the user to define the required frequency, amplitude and duty cycle of the output signal.

In addition to these features, the 8N4Q001EG-0054CDI contains an integrated watch-dog timer. The watch-dog timer is used to monitor the system and detect if it has become unresponsive or unstable due to some form of interference or malfunction. If the timer detects a fault, it will reset the system to its original state, allowing the system to continue operation without disruption.

The 8N4Q001EG-0054CDI also contains an adjustable pre-scaler, which allows the user to define the internal clock frequency. This is an important feature in critical applications, as it allows the user to set the clock frequency accurately to ensure that all the tasks within the system are synchronized with each other. Finally, the device also contains an on-board 32-bit counter, which can be used for logging and recording data.

The 8N4Q001EG-0054CDI is a highly reliable, low-cost and flexible programmable timer/oscillator that can be used in almost any application where reliable timing and stability of timing measurements is essential. It utilizes a combination of active loop stabilization and quartz crystal oscillators to deliver exceptionally accurate results. The user can define the parameters of the output signal, allowing for greater flexibility and control. In addition, the device contains an integrated watch-dog timer, a pre-scaler and a 32-bit counter, making it an ideal solution for logging and recording data.