8N4Q001EG-1124CDI8

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The clock/timing - programmable timers and oscillators are important for the normal operation of a wide range of electronic systems, as well as for optimized synchronization of multiple system components with clock signals of different speeds. The 8N4Q001EG-1124CDI8 is a programmable timer and oscillator that allows users to conveniently set the frequency and timing of clock signals, greatly simplifying system startup, maintenance, and optimization.

The 8N4Q001EG-1124CDI8 operates in a wide range of frequency ranges, including frequencies above or below the standard crystal oscillator frequency, down to very low frequencies. This makes it an ideal solution for synchronizing multiple system components and clocks of different frequencies. The 8N4Q001EG-1124CDI8 also offers a wide selection of programmable frequency dividers and dividers with complex cycles. The four independent frequency dividers of the 8N4Q001EG-1124CDI8 make it possible to generate multiple clock signals from a single input clock signal, which can then be passed to multiple system components to ensure synchronized operation.

In addition to its wide range of frequency dividers, the 8N4Q001EG-1124CDI8 also offers a wide range of programmable timing functions. This allows users to configure the clock signal\'s duty cycle, phase shift, and pulse width. Using the 8N4Q001EG-1124CDI8\'s programmable timing functions, users can easily configure their system\'s timing parameters to obtain optimal system performance.

The 8N4Q001EG-1124CDI8 is widely used in an array of applications, ranging from industrial automation to communications, computer networks, and embedded control systems. With its wide flexibility in terms of frequencies, programmable timing functions, and frequency dividers, the 8N4Q001EG-1124CDI8 is an ideal choice for those who need to create or optimize clock signals for multiple system components.

The working principle of the 8N4Q001EG-1124CDI8 is relatively simple. The device takes an input clock signal, and uses its programmable frequency dividers to divide it into multiple frequency signals. These frequency signals are then passed to multiple system components to ensure timed, synchronized operation. The frequency dividers of the 8N4Q001EG-1124CDI8 can be programmed to divide the input clock signal by a wide range of divider values, allowing users to customize their system timing. The 8N4Q001EG-1124CDI8 also offers a wide range of programmable timing functions, allowing users to adjust the duty cycle, phase shift, and pulse width of the clock signals.

The 8N4Q001EG-1124CDI8 is an important component in a wide variety of modern electronic systems, and its use simplifies the setup and maintenance of complex device timing and synchronization. With its wide range of frequencies, frequency dividers, and programmable timing functions, the 8N4Q001EG-1124CDI8 makes system optimization and synchronization much easier than with conventional crystal oscillators.

The specific data is subject to PDF, and the above content is for reference