8N4Q001FG-0139CDI

Series:	FemtoClock® NG
Packaging:	Tray
Part Status:	Active
Type:	Clock Oscillator
Count:	--
Frequency:	170MHz, 200MHz, 220MHz, 250MHz
Voltage - Supply:	2.375 V ~ 2.625 V
Current - Supply:	155mA
Operating Temperature:	-40°C ~ 85°C
Package / Case:	10-CLCC
Supplier Device Package:	10-CLCC (7x5)
Mounting Type:	Surface Mount

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

8N4Q001FG-0139CDI Programmable Timers and Oscillators

The 8N4Q001FG-0139CDI is a programmable timer and oscillator from Mitsubishi Electronics that is part of the Clock/Timing products offered. It offers a wide range of features and performance that makes it suitable for use in a variety of applications. This article will discuss the application field and working principle of the 8N4Q001FG-0139CDI.The 8N4Q001FG-0139CDI is a low-power, low-cost, programmable timer and oscillator that offers an accurate clock source for microcontroller applications. It features an adjustable frequency range from 0.1 to 8 MHz, a frequency stability of ±2%, and an output frequency resolution of 0.05%. Additionally, it offers a wide range of features such as a built-in PLL for clock scaling and temperature compensated performance. The 8N4Q001FG-0139CDI also features an internal voltage regulator and a total of three selectable power supply modes (3x3V, 5-18V and 2x3V).This programmable timer and oscillator is suitable for a variety of applications, including digital programming of clocks and counters, remote control systems, automotive systems and automotive electronic control units (ECUs), USB devices, smart sensors, and embedded systems. Its wide range of features makes it ideal for applications that require low-power, low-cost, and highly accurate timing.The programmable timer and oscillator is based on the principle of an oscillator. It is a circuit that utilizes an electronic component such as a capacitor and resistor that, when energized, produces a feedback system that causes the circuit to oscillate. The oscillator\'s output frequency is determined by the values of the components and by the frequency of the clock signal applied to it. This clock signal can be generated from an internal or external clock source or from an external input.The 8N4Q001FG-0139CDI incorporates a phase-locked loop (PLL) to increase the frequency resolution and accuracy of the oscillator. The PLL is a system that synchronizes the phase and frequency of the input signal with the frequency output of the oscillator. The PLL is composed of a voltage-controlled oscillator (VCO) that is phase- and frequency-locked to an input clock signal, an amplifier, and a phase detector. The phase detector compares the inputs of the two signals and produces an error signal proportional to the phase difference between them. The error signal is then used to adjust the frequency and phase of the VCO. In this way, the PLL ensures that the output of the oscillator is synchronized with the input clock frequency.The 8N4Q001FG-0139CDI is designed to work with a wide range of voltage levels, from 2.5V to 24V, and has an adjustable frequency range from 0.1 to 8MHz. It also offers a total of three selectable power supply modes (3x3V, 5-18V and 2x3V).In conclusion, the 8N4Q001FG-0139CDI is a programmable timer and oscillator from Mitsubishi Electronics that offers an accurate clock source for microcontroller applications. It is suitable for application fields that require low-power, low-cost, and highly accurate timing. The 8N4Q001FG-0139CDI utilizes the principle of an oscillator and incorporates a phase-locked loop to ensure the accuracy of the frequency output. It also features a wide range of features including adjustable frequency range, frequency stability, and total of three selectable power supply modes.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description