8N4Q001KG-204LCDI8

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 8N4Q001KG-204LCDI8 is a programmable timer and oscillator used for a variety of applications, including clock synchronization, time domain multiplexing, and frequency domain multiplexing. It is designed to provide accurate and stable timing control for critical control systems and is particularly well suited for digital signal processing applications.

The device has built-in functions for clock generation, time keeping and detection of edge transitions. It has three operating modes: single-shot mode, continuous mode, and auto-restart mode, with an external reset capability. The timing intervals are programmable, requiring no external crystal or clock source. Programmable registers are provided to set the start, stop, and overflow times.

The 8N4Q001KG-204LCDI8 is uniquely suited to the task due to its flexible and programmable design and its wide input voltage range. It is able to operate at either 3.3V or 5.0V, greatly extending its potential applications. The 8N4Q001KG-204LCDI8 is available in a variety of packages, including 6-pin DIP, 8-pin DIP and SOIC as well as surface mount packages.

The working principle of the 8N4Q001KG-204LCDI8 is based on a time counter operated by a quartz crystal oscillator. This oscillator controls the counter and the counter is used to determine when a given event or signal should be detected. The signal or event to be detected is connected to one of the digital inputs of the 8N4Q001KG-204LCDI8. When this signal is detected the 8N4Q001KG-204LCDI8 will output an interrupts to a controlling microprocessor.

The 8N4Q001KG-204LCDI8 also includes a programmable register which allows the user to specify the start and stop times of the signal detection. These times can be used to determine when the signal should start and stop being detected. The register also includes an overflow bit which is used to indicate that the signal has been detected before the specified start or stop times.

The 8N4Q001KG-204LCDI8 is capable of detecting the transition of a digital signal from high to low, or low to high. It is also capable of detecting a signal pulse width, allowing the user to define a certain pulse width to act as a signal detection trigger. This feature allows for complex timing control and signal processing applications.

In summary, the 8N4Q001KG-204LCDI8 is a programmable timer and oscillator designed for digital signal processing applications. It has wide input voltage range and has three operating modes; single-shot, continuous, and auto-restart. It has a built-in quartz crystal oscillator and programmable registers for setting start and stop times, as well as an overflow bit. Finally, it is capable of detecting signal transitions and pulse widths, making it an ideal choice for complex timing control and signal processing.

The specific data is subject to PDF, and the above content is for reference