8N4QV01EG-0027CDI

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 8N4QV01EG-0027CDI is a programmable timer and oscillator clock module used in various types of equipment. It is part of the Clock/Timing family of products, specializing in Programmable Timers and Oscillators.

The 8N4QV01EG-0027CDI is designed to provide effective and reliable timing control when used with digital devices. This robust timer can be used for functions such as interval timers, watchdogs, and time-based relays.

The 8N4QV01EG-0027CDI\'s operation is based on the principle of using a clock source to control a timing circuit. The clock source can be either an internal or an external source. The internal clock source uses a quartz crystal oscillator to generate a clock signal. The external clock source can be either an AC signal or a TTL/CMOS square wave. When the clock signal is applied to the timing circuit, it is integrated and the timer will be triggered.

The operating parameters of the 8N4QV01EG-0027CDI can be easily configured. The frequency range is from 0.2 Hz to 32 kHz and the output current is fine-tuned to the desired level. The time functions include single-shot, pulse delay, pulse stretching, interval timing, and pulse repetition. These built-in functions make it easy to set up customized timing applications.

The 8N4QV01EG-0027CDI also features a variety of additional functions. It has a non-volatile memory for storing the programmed delay time and other settings, and a digital input/output port for connecting to external devices. The integrated current source can be used to drive LEDs, buzzers, and other output devices. Additionally, there is a power-on reset, which enables the module to maintain the timer settings even when the power is turned off.

The 8N4QV01EG-0027CDI is superior to older timer circuits, as it has higher accuracy, smaller size, and improved reliability. Its wide frequency range and adjustable current output make it an attractive choice for applications such as industrial equipment, medical devices, automotive electronics, and consumer electronics.

The 8N4QV01EG-0027CDI is a reliable and cost-effective programmable timer and oscillator module designed for use in a variety of electronic systems. It uses a quartz crystal oscillator to generate clock signals, and can be configured for a wide range of time functions.

The specific data is subject to PDF, and the above content is for reference