8N4QV01LG-1134CDI

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Programmable timers and oscillators are key components used in the circuitry and operation of many of today\'s electronic devices. The 8N4QV01LG-1134CDI is an example of such a timer and oscillator, designed for use in a wide range of applications, from power management and processor performance control to digital data transmission and measurement. When used correctly, this timer/oscillator provides consistent, reliable performance for a wide range of time-related and frequency-related operations. The following sections provide an overview of the 8N4QV01LG-1134CDI module and its applications.

8N4QV01LG-1134CDI Application Fields

The 8N4QV01LG-1134CDI is an integrated circuit comprising a dual-phase clock/timing logic, two separate output channels, and two separate supply voltage levels (2.7V and 3.3V). This gives the module the ability to generate both high-frequency signals and low-frequency signals, which are useful in many applications. One of the most important applications is the field of power management. The 8N4QV01LG-1134CDI can be used to generate a fixed output frequency which allows an integrated circuit to enter a low-power standby mode when not in use. This not only saves power, but also provides protection against voltage fluctuations, making it a valuable asset in the development of efficient power management systems.

The 8N4QV01LG-1134CDI is also widely used in processor performance control, digital data transmission, and measuring operations. In the field of processor performance control, this timer/oscillator can be used to accurately calculate processor speed and cycle time. For digital data transmission, the signal outputs of the 8N4QV01LG-1134CDI can be used to produce digital signal pulses that can transmit data across a network. And in the field of precision measurement, this timer/oscillator can be used to precisely measure time intervals or frequency of external signals.

8N4QV01LG-1134CDI Working Principle

The 8N4QV01LG-1134CDI incorporates a dual-phase clock/timing logic which consists of four main parts: the power supply, the clock input signal, the clock output signal, and the dual-phase logic circuit. The power supply provides voltage to the module; the clock input signal is applied to the module’s clock input terminal; the clock output signal is the signal produced by the module’s output terminal; and the dual-phase logic circuit produces the desired frequency by comparing the clock input signal with the clock output signal.

The dual-phase logic circuit works by comparing the frequency of the input signal with the output signal and adjusting the output frequency until it matches the clock input signal. This is accomplished by generating two out-of-phase signals, one with a higher frequency (the “clock A” signal) and one with a lower frequency (the “clock B” signal). When the clock A signal matches the clock input signal, the clock A output frequency is adjusted so that it is slightly lower than the input frequency. When the clock B signal matches the clock input signal, the clock B output frequency is adjusted so that it is slightly higher than the input frequency.

This process of fine-tuning the output frequency continues until the two out-of-phase signals align precisely with the clock input signal. Once the 8N4QV01LG-1134CDI is tuned to the desired frequency, it will remain at that frequency until reset. This is the fundamental principle behind the operation of the 8N4QV01LG-1134CDI programmable timer and oscillator.

Conclusion

The 8N4QV01LG-1134CDI is a versatile clock/timing module that can be used in a variety of applications, from power management and processor performance control to digital data transmission and measurement. Its dual-phase clock/timing logic enables it to quickly and accurately tune its output frequency to match the clock input signal, making it a reliable and precise solution for many time-related and frequency-related operations. By integrating this timer/oscillator into a compatible circuit, designers can ensure that operations run with consistency and accuracy, making it a valuable addition to any system design.

The specific data is subject to PDF, and the above content is for reference