8N4SV75BC-0041CDI

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Programmable timers and oscillators form the basis of a lot of electronic devices, as most are controlled by an electronic timer or oscillator. This is especially so in devices with things like digital displays, as they are normally driven by an oscillator in order to display a set of numbers that cycle through each column at the prescribed rate. The 8N4SV75BC-0041CDI is a programmable timer and oscillator specifically designed for applications that require accurate frequency control. This article will discuss the application field and working principle of the 8N4SV75BC-0041CDI.

Applications of the 8N4SV75BC-0041CDI

The 8N4SV75BC-0041CDI is an inexpensive and reliable programmable timer and oscillator. It is used for a wide variety of applications, ranging from Time Division Multiplexing (TDM) systems to frequency synthesizers. The 8N4SV75BC-0041CDI is also well suited for use in consumer electronics, musical instruments, automotive, and aerospace applications. In these applications, the timer and oscillator are often used to provide precise timing signals, as well as to ensure accurate frequency control. In addition, the 8N4SV75BC-0041CDI is able to offer a great deal of flexibility and ease of programming, making it an ideal choice for many applications.

Working Principle of the 8N4SV75BC-0041CDI

The 8N4SV75BC-0041CDI is based on a low-power, highly programmable oscillator design. This allows the timer to run at frequencies from 0.1 Hz to 100 MHz while consuming less than 1 mW of power when running. The timer is designed using a charge-pump circuit, which is embedded in a single 8-pin package. The 8N4SV75BC-0041CDI is powered by 5V and requires no external components to be programmed. The timer also has a programmable delay select (D/R) pin which can vary the interval between the rising and falling edges of the signal output. In addition, the timer has a frequency selection pin (F/S) which can be used to vary the frequency of the signal output.

The 8N4SV75BC-0041CDI also features a programmable phase-locked loop (PLL) option, which can be used to generate a high-frequency signal from an internal reference. The PLL can be programmed for a wide range of operating frequencies. For example, it can be programmed for frequencies anywhere from 1 kHz to 100 MHz. This makes the 8N4SV75BC-0041CDI ideal for precision timing applications such as frequency synthesizers, DDS modules, and clock dividers.

Conclusion

The 8N4SV75BC-0041CDI is a highly programmable and versatile programmable timer and oscillator. It is well suited for a variety of applications, including time-division multiplexing systems, frequency synthesizers, and precision timing applications. The timer is designed using a low-power, highly programmable oscillator design, which allows it to run at frequencies from 0.1 Hz to 100 MHz while consuming less than 1 mW of power. Furthermore, the timer also has an integrated PLL which can be used to generate a wide range of frequencies, making it highly flexible and suitable for various applications.

The specific data is subject to PDF, and the above content is for reference