8N4SV76AC-0101CDI

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Programmable timers and oscillators are useful for industrial, scientific, and medical purposes. They are used in many fields including automotive, aerospace, telecommunications, and data switching applications. This article will discuss the 8N4SV76AC-0101CDI application field and working principle, as an example of a programmable timer and oscillator.

The 8N4SV76AC-0101CDI is a programmable timer and oscillator. It is a component used in many applications such as industrial and automotive. The 8N4SV76AC-0101CDI is typically used as a timing device in industrial machinery and in automotive control systems, allowing for variable levels of speed, acceleration, deceleration, and other motions. As an oscillator, the 8N4SV76AC-0101CDI is configured to produce a steady stream of repeatable frequencies.

The 8N4SV76AC-0101CDI works in two main modes – free run and reset. In free run mode, the device begins creating a frequency as soon as it is powered on. This mode is useful for applications such as testing and creating a continuous output frequency for an application. The reset mode establishes a given frequency for the device. This mode is useful for applications such as synchronizing multiple devices, as each device can run at the same frequency.

The 8N4SV76AC-0101CDI includes a programmable frequency programmable input and output. The frequency counter can be adjusted to a range between 0-5kHz at a resolution of 1Hz. The frequency data is transmitted via an SPI port. This data can be used to program the frequency output of the device. It can also be used to synchronize multiple devices, enabling reliable communications between different components.

The 8N4SV76AC-0101CDI also includes a programmable dead zone and a pulse mark/space ratio. The pulse mark/space ratio is the ratio of time activated high to low and can be used to adjust the frequency of the output. The dead zone is the amount of time for which no pulse mark/space ratio is seen. This is used to limit the amount of load placed on the system and optimize performance.

The 8N4SV76AC-0101CDI has many configurable parameters which can be used to tailor the device to specific applications. This includes phase shift and duty cycle. The phase shift can be adjusted up to 180° in 1° increments, allowing for a range of phase shift settings to be programmed. The duty cycle is the proportion of time that the signal is active in a period of time. This can also be tailored to a specific application.

In summary, the 8N4SV76AC-0101CDI is a programmable timer and oscillator designed for industrial purposes. It has two main modes, free run and reset, and several configurable parameters such as phase shift and duty cycle. It has programmable frequencies and a programmable input and output. The 8N4SV76AC-0101CDI is used in automotive control systems and industrial machinery, allowing for variable speed, acceleration and deceleration, and is used to synchronize multiple components.

The specific data is subject to PDF, and the above content is for reference