8T49N008A-048NLGI8

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 8T49N008A-048NLGI8 is a Clock Generator/PLL that provides a wide range of clock output frequencies based on a differential reference clock. This device can replace multiple components, simplifying the design and reducing cost while providing optimal design flexibility.

Clock Generators are devices that are used to generate the clock signals necessary for a range of applications. PLL\'s (Phase Locked Loops) are the most common type of Clock Generators, and combine multiple components to achieve the required output clock frequencies.

The 8T49N008A-048NLGI8 is a PLL-based Clock Generator/PLL with a power supply range of 1.2V to 3.3V. It has four separate outputs which can be used to achieve different clock frequencies. The outputs range from 10 MHz to 200 MHz. It also has an on-board Programmable Delay Line, which allows for fine tuning of the delays between the outputs.

This Clock Generator/PLL also has an integrated voltage control unit, allowing users to adjust the voltage applied to the output clocks. This allows the user to adjust the output frequencies of the clock outputs, as well as reducing power consumption.

The 8T49N008A-048NLGI8 also comes with an on-board temperature sensor, which allows the users to monitor the temperature of the device. This is important for ensuring the long-term reliability of the device, as high temperatures can affect the device\'s performance.

The 8T49N008A-048NLGI8 can be used in a range of applications, including automotive, consumer, industrial and medical. This device is well suited for use in a range of low-power designs, as it consumes only 0.3 to 1.2mA of current. It can be used in a variety of devices, from remote power converters to medical devices.

The 8T49N008A-048NLGI8 also offers excellent frequency stability and low phase noise, as well as a wide range of output frequencies. This makes it an ideal choice for products requiring precise timing and control.

The 8T49N008A-048NLGI8’s working principle is based on the PLL (Phase Locked Loop) architecture. The PLL is a closed-loop feedback control system that uses two signals; the reference signal and the feedback signal. The reference signal is an oscillator that is used to generate a reference frequency, while the feedback signal is generated by the output of the device and fed back to the input. The PLL then compares the two signals, and modifies one or more parameters to maintain the desired output frequency.

The 8T49N008A-048NLGI8 uses this principle to generate precise clock frequencies from a differential reference clock. This device can be easily configured to generate the required output frequencies, providing a cost-effective and flexible solution for a variety of clock-dependent applications.

The specific data is subject to PDF, and the above content is for reference