8W-13.000MBB-T Crystals, Oscillators, Resonators

Frequency Stability:	±50ppm
Current - Supply (Disable) (Max):	--
Height - Seated (Max):	0.035" (0.90mm)
Size / Dimension:	0.098" L x 0.079" W (2.50mm x 2.00mm)
Package / Case:	4-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	15mA
Operating Temperature:	-10°C ~ 70°C
Series:	8W
Voltage - Supply:	3.3V
Output:	CMOS
Function:	Enable/Disable
Frequency:	13MHz
Type:	XO (Standard)
Base Resonator:	Crystal
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

8W-13.000MBB-T Oscillators Application Field and Working Principle

Oscillators are commonly used in electronic circuits, and 8W-13.000MBB-T is one great example. 8W-13.000MBB-T oscillators can provide a wide range of output frequency range—from 1 MHz to 200 MHz , and incorporate crystal and ceramic material technology. Therefore, 8W-13.000MBB-T is an ideal choice of a crystal oscillator when applications require medium frequency ranges.8W-13.000MBB-T oscillators are typically found in all kinds of technical applications. The oscillators are used in general purpose instrumentation circuits such as communications systems, power supplies, medical equipment, or sensing systems, for example. 8W-13.000MBB-T can also be used in automotive applications, including automotive radio, car alarms, and similar electronic applications.The basic principle of a crystal oscillator is to turn electrical energy into mechanical vibration which, in turn, is converted back into electrical energy. In essence, the electrical energy is oscillated back and forth. 8W-13.000MBB-T oscillators make use of the quartz crystal material. At the working frequency, the quartz crystal falls into the resonance state and can store energy, which is then released periodically.Inside an 8W-13.000MBB-T crystal oscillator, there is an amplifier which is used to increase the mechanical vibration of the quartz crystal. At its resonance frequency, the device is connected to the crystal through a programmable capacitor, a temperature-sensing resistor, and a FET switch. The FET switch is used to provide a high output power that can be used for many applications.When current passes from the amplifier to the crystal through the programmable capacitor, the stored energy in the crystal is released, resulting in a vibration at the resonant frequency. This vibration is than converted back into an electrical signal, and the oscillator produces a sine wave output. The 8W-13.000MBB-T oscillator is further equipped with a feedback circuit, and the phase-locked loop (PLL) which helps to ensure a higher accuracy and better jitter performance.The 8W-13.000MBB-T oscillators also make use of cryogenic technology which helps to enhance the frequency stability of the crystal oscillator. This cryogenic technique works by making use of a cryogenic material to reduce the thermal expansion of the quartz, thus reducing frequency changes due to temperature variation.In conclusion, 8W-13.000MBB-T oscillators are used in a variety of technical applications, due to their wide output frequency range and their reliability. They make use of the quartz crystal material and a feedback circuit, and are further enhanced by cryogenic technology for better frequency stability.

The specific data is subject to PDF, and the above content is for reference