8W-36.000MCB-T

Frequency Stability:	±50ppm
Current - Supply (Disable) (Max):	--
Height - Seated (Max):	0.035" (0.90mm)
Size / Dimension:	0.098" L x 0.079" W (2.50mm x 2.00mm)
Package / Case:	4-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	15mA
Operating Temperature:	-10°C ~ 70°C
Series:	8W
Voltage - Supply:	2.5V
Output:	CMOS
Function:	Enable/Disable
Frequency:	36MHz
Type:	XO (Standard)
Base Resonator:	Crystal
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators

An oscillator is an electronic circuit that produces an alternating current signal. It is typically used to control the frequency and amplitude of electrical signals in various applications, such as radio communication, automotive electronics, communication systems, audio equipment, power supplies, and circuit testing. Oscillators can be classified based on the type of waveform produced, such as square wave, triangle wave, sinusoidal wave, and pulse wave.The 8W-36.000MCB-T is a type of oscillator from the MCB (multi-chip bridge) series of oscillators manufactured by Polytech. This oscillator is designed for use in broadband and long-range applications such as DSL modems, datacom systems, base station antennas, and fiber optics. It produces a 36 MHz signal with an amplitude of 6Vp-p and a duty cycle of 50%.The oscillator consists of two main components: a quartz crystal and an oscillator circuit. The quartz crystal is a tiny piece of quartz that vibrates at a precise frequency when a electrical signal is applied to it. This frequency is known as the crystal\'s resonant frequency. The oscillator circuit consists of various electronic components such as capacitors, resistors, and transistors which are used to convert the quartz crystal\'s resonance into an electrical signal.The 8W-36.000MCB-T oscillator works by taking advantage of the frequency stability of the quartz crystal. The quartz crystal is connected to an amplifier and then to a feedback circuit which adjusts the oscillator\'s frequency and helps it maintain stability. The amplifier amplifies the oscillation signal from the quartz crystal and the feedback circuit produces a feedback signal in response to the amplitude of the oscillation signal from the quartz crystal. The feedback signal is applied back to the amplifier in order to adjust the frequency of the oscillator.The 8W-36.000MCB-T oscillator is designed to run off a single 5V supply and offers several features such as low supply current, low quiescent current, and low current consumption. The oscillators low power consumption makes it ideal for use in low power applications. Additionally, the oscillator has a frequency stability of ± 5 ppm over the -40 °C to +85 °C temperature range and provides excellent phase noise performance.The 8W-36.000MCB-T oscillator has several applications in telecommunication, radar, and satellite communication systems. It can be used as a reference oscillator for signal synchronization and can also be used to generate local oscillator frequencies for various RF transceivers and communication systems. Additionally, it can be used in GPS systems, mobile networks, and re-telling oscillators. In short, the 8W-36.000MCB-T oscillator can be used in a broad range of communication systems and applications.

The specific data is subject to PDF, and the above content is for reference