Allicdata Part #: | 8Z-26.000MEEC-T-ND |
Manufacturer Part#: |
8Z-26.000MEEC-T |
Price: | $ 0.48 |
Product Category: | Crystals, Oscillators, Resonators |
Manufacturer: | TXC Corporation |
Short Description: | CRYSTAL 26.000MHZ 9PF SMD |
More Detail: | 26MHz ±10ppm Crystal 9pF 100 Ohms 4-SMD, No Lead |
DataSheet: | 8Z-26.000MEEC-T Datasheet/PDF |
Quantity: | 1000 |
3000 +: | $ 0.44100 |
Series: | 8Z |
Part Status: | Active |
Type: | MHz Crystal |
Frequency: | 26MHz |
Frequency Stability: | ±10ppm |
Frequency Tolerance: | ±10ppm |
Load Capacitance: | 9pF |
ESR (Equivalent Series Resistance): | 100 Ohms |
Operating Mode: | Fundamental |
Operating Temperature: | -20°C ~ 70°C |
Ratings: | -- |
Mounting Type: | Surface Mount |
Package / Case: | 4-SMD, No Lead |
Size / Dimension: | 0.098" L x 0.079" W (2.50mm x 2.00mm) |
Height - Seated (Max): | 0.022" (0.55mm) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Crystals are used to control and maintain high frequency stability in applications ranging from telecommunications to laboratory instruments. 8Z-26.000MEEC-T is a crystal used in high-frequency applications. This article will discuss the application field and working principle of 8Z-26.000MEEC-T.
8Z-26.000MEEC-T is a common crystal used for frequency control in powercontrol and voltage control applications. It has an operating temperature range of -20°C to 75°C and has a frequency stability of ±25 ppm. It is typically used in power supplies, and it is also used in a wide range of electronic equipment such as video cameras, audio equipment and oscillators. It is also used in cellular phones and cell towers, as well as in device calibration and test equipment.
The working principle of 8Z-26.000MEEC-T is based on the phenomenon of piezoelectricity. Piezoelectricity is the ability of certain materials to generate an electrical charge when they are subjected to pressure or strain. When a voltage is applied to the crystal, it causes mechanical vibrations to occur, which in turn affects the frequency of the electrical current passing through the crystal. In 8Z-26.000MEEC-T, the frequency of these vibrations is precisely controlled and kept constant over a range of operating temperatures.
To ensure accurate frequency control and stability, 8Z-26.000MEEC-T must be installed correctly. The crystal needs to be securely attached to the board with appropriate mounting hardware, and all connections have to be properly soldered. Additionally, the crystal should be placed in an appropriate environment to minimize temperature-induced frequency variations. To further optimize performance, the crystal should be equipped with a circuit protection device.
In summary, 8Z-26.000MEEC-T is a crystal used widely in powercontrol and voltage control applications. It is based on the phenomenon of piezoelectricity, which allows the crystal to generate mechanical vibrations when a voltage is applied. These vibrations in turn control the frequency of the current passing through the crystal. The crystal needs to be securely attached to the board in order to ensure accurate frequency control, and also needs to be placed in an appropriate environment. With the right installation and usage, 8Z-26.000MEEC-T can provide reliable frequency stability and performance.
The specific data is subject to PDF, and the above content is for reference
Crystal 8.59MHz 39pF 3-Pin CSMD T/R - Ta...
CRYSTAL 52.000 MHZ 12PF SMT52MHz 15ppm C...
CRYSTAL 50.000 MHZ 8PF SMT50MHz 15ppm Cr...
CRYSTAL 48.000 MHZ 8PF SMT48MHz 20ppm Cr...
CRYSTAL 44.000 MHZ 6PF SMT44MHz 20ppm Cr...
CRYSTAL 40.610 MHZ SERIES SMT40.61MHz 15...