Allicdata Part #: | 887-1147-2-ND |
Manufacturer Part#: |
8Z-27.000MAAJ-T |
Price: | $ 0.54 |
Product Category: | Crystals, Oscillators, Resonators |
Manufacturer: | TXC Corporation |
Short Description: | CRYSTAL 27.0000MHZ 18PF SMD |
More Detail: | 27MHz ±30ppm Crystal 18pF 100 Ohms 4-SMD, No Lead |
DataSheet: | 8Z-27.000MAAJ-T Datasheet/PDF |
Quantity: | 1000 |
3000 +: | $ 0.48510 |
6000 +: | $ 0.46778 |
Series: | 8Z |
Packaging: | Tape & Reel (TR) |
Part Status: | Active |
Type: | MHz Crystal |
Frequency: | 27MHz |
Frequency Stability: | ±30ppm |
Frequency Tolerance: | ±30ppm |
Load Capacitance: | 18pF |
ESR (Equivalent Series Resistance): | 100 Ohms |
Operating Mode: | Fundamental |
Operating Temperature: | -20°C ~ 70°C |
Ratings: | -- |
Mounting Type: | Surface Mount |
Package / Case: | 4-SMD, No Lead |
Size / Dimension: | 0.098" L x 0.079" W (2.50mm x 2.00mm) |
Height - Seated (Max): | 0.022" (0.55mm) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Crystals have been an integral part of modern technology for many decades. From radio tuning to digital clocks and frequency references, they are everywhere. 8Z-27.000MAAJ-T is one such type of crystal, and this article will provide an overview of its application field and working principle.
8Z-27.000MAAJ-T is a TEMEX Silicon technology Fundamental AT-cut crystal suitable for a variety of applications. Its frequency is 27MHz, with an tolerance of +/-20ppm, a drive level of 4.5μW, and a operating temperature range of -40 to +85°C. This makes it well suited for frequency references and oscillators for both consumer and industrial purposes.
When properly tuned and adjusted, 8Z-27.000MAAJ-T crystals can provide precision frequencies for a variety of uses. This includes data acquisition, radio and television tuning, satellite communication, mobile telephones, and other applications. It’s low-cost and wide operating temperature range is also attractive to manufacturers looking to reduce costs.
In terms of working principle, 8Z-27.000MAAJ-T crystals are based on the principle of the AT-cut crystal. These crystals are made of quartz and cut at an angle to create a high-quality electrical resonator. When an electrical signal is applied to the crystal, it vibrates at a specific frequency determined by its physical properties. This same principle is also used in oscillators, which are used to control the rate at which clock signals are generated.
Most 8Z-27.000MAAJ-T crystals are designed to have a high load capacitance ratio, meaning that they can achieve very precise frequency accuracy. This is vital for accurate timekeeping, as even small errors in the timing of clock signals can cause major disruptions. Furthermore, these crystals are built to last, with many devices still functioning after decades of use.
In conclusion, 8Z-27.000MAAJ-T crystals are ideal for applications that need accurate and reliable frequency references. They are relatively low-cost, have a wide operating temperature range, and boast a high frequency accuracy rating. Furthermore, they are based on the AT-cut principle, making them well-suited for use in digital clocks, frequency sources, and oscillators.
The specific data is subject to PDF, and the above content is for reference
Crystal 8.59MHz 39pF 3-Pin CSMD T/R - Ta...
CRYSTAL 52.000 MHZ 12PF SMT52MHz 15ppm C...
CRYSTAL 50.000 MHZ 8PF SMT50MHz 15ppm Cr...
CRYSTAL 48.000 MHZ 8PF SMT48MHz 20ppm Cr...
CRYSTAL 44.000 MHZ 6PF SMT44MHz 20ppm Cr...
CRYSTAL 40.610 MHZ SERIES SMT40.61MHz 15...