901-10021-1SF Connectors, Interconnects

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Coaxial Connectors (RF)

Coaxial connectors, also known as RF connectors, are a widely used type of connector typically used with coaxial cables. They are often found in electronic equipment used in communication, broadcasting, aerospace, and military applications. The 901-10021-1SF is an example of a coaxial connector commonly used in these types of applications.

Overview of 901-10021-1SF Connector

The 901-10021-1SF connector is a nickel-plated, silver-plated, snap-on, quick-connect RF connector. It is able to provide superior high frequency applications up to 6GHz with a low intermodulation level. It also operates at a mating cycle of about 200 cycles. This makes it suitable for use in environments which may require frequent connections and disconnections.

Applicable Cables

The 901-10021-1SF connector is designed to be used with 50-ohm coaxial cables. These cables consist of an outer shield and an inner transmission line which are electrically and mechanically secured in a single cable. This type of cable is used to carry radio frequency signals and is commonly used in radio transmission and broadcasting applications.

Working Principle

The 901-10021-1SF connector consists of two primary parts: the plug and the jack. The plug, also known as the male connector, is the piece that is connected to the cable. The jack, or female connector, is the piece that is inserted into the other end of the cable. The plug and jack are each connected to a ground pin which allows the connector to make proper contact.

When the two pieces are connected, an electromagnetic field is created. This field creates an electrical connection between the two pieces so that signals or power can travel through the coaxial cable from one end to the other. The connection is maintained by a compliant mating pin which can be adjusted to contact different features of the plug and jack. This creates a secure connection which prevents any signal interference or power loss.

Benefits

The 901-10021-1SF connector provides a reliable connection for applications up to 6GHz. It is also relatively small in size, making it suitable for a wide range of applications. The connector is also very easy to install and remove, allowing for quick and easy setup or teardown. The connector is also lightweight and low cost, making it ideal for applications where cost is a factor. Finally, the connector is highly resistant to corrosion and environmental factors, allowing it to function reliably over long periods of time.

Conclusion

The 901-10021-1SF connector is a versatile and reliable solution for high frequency applications. Its wide applicable range, high mate-ability, and superior performance make it a great choice for many different types of applications. It is also relatively easy to install and low cost, making it an attractive option for applications where cost is a factor. The 901-10021-1SF is an excellent choice for any application requiring a reliable and dependable connection.

The specific data is subject to PDF, and the above content is for reference