903-536P-71S

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Coaxial Connectors (RF) are used extensively in radiofrequency (RF) and microwave communications. The 903-536P-71S is a type of Coaxial Connector that is used in a variety of RF communication systems. This article will discuss the application field and working principle of the 903-536P-71S Coaxial Connector.

The 903-536P-71S Coaxial Connector is a high performance, low-loss connector intended for use in a wide array of communications systems. The 903-536P-71S is a two-piece interface, with an outer “body” and a dielectric insulator at the interface. The outer body of the connector is made from brass and has a polished surface on mating sides, and features a threaded body which eliminates any possibility of misalignment. The insulator is a precision-formed silicone rubber and provides a good electrical connection between the connectors.

The 903-536P-71S Coaxial Connector is rated for use in a variety of applications and systems, including: terrestrial telecommunications networks, high frequency circuits, and Local Area Networks (LAN). The 903-536P-71S is a low-loss connector suitable for use in high frequency circuit designs where high-performance is required. The 903-536P-71S has been used in a variety of applications, including but not limited to: radio base station antennas, data/video transmission, and radar/sonar applications.

The working principle of the 903-536P-71S Coaxial Connector is based on the electrically conductive properties of brass and the electrically insulating properties of silicone rubber. The brass body of the connector is electrically conductive and provides an electrical pathway between the male and female connectors. The insulator is composed of silicone rubber and acts as an electrical barrier, preventing the flow of electrical current between the connectors. The working principle of the 903-536P-71S requires the physical contact between the connector’s brass body and insulator, allowing the connector to create an electrical connection.

The 903-536P-71S Coaxial Connector is a high performance, low-loss connector that can be used in a variety of applications and systems. The working principle of the 903-536P-71S is based on the electrically conductive properties of brass and the insulated properties of the silicone rubber. This makes the 903-536P-71S a reliable and cost-effective connector for a variety of communications systems and applications.

The specific data is subject to PDF, and the above content is for reference