908-41400 Connectors, Interconnects

Number of Ports:	1
Features:	--
Housing Color:	Gold
Ingress Protection:	--
Includes:	2 pcs - 1 Connector, 1 Contact
Body Material:	Brass
Body Finish:	Gold
Center Contact Plating:	Gold
Dielectric Material:	Polytetrafluoroethylene (PTFE)
Operating Temperature:	-65°C ~ 165°C
Center Contact Material:	Brass
Mating Cycles:	500
Insertion Loss:	--
Series:	MicroMate™
Packaging:	Bulk
Lead Free Status / RoHS Status:	--
Part Status:	Active
Moisture Sensitivity Level (MSL):	--
Connector Style:	MMCX
Connector Type:	Plug, Male Pin
Contact Termination:	Solder
Shield Termination:	Solder
Impedance:	50 Ohm
Mounting Type:	Free Hanging (In-Line)
Mounting Feature:	--
Cable Group:	RG-405 (.085", .086" Semi Rigid)
Fastening Type:	Snap-On
Frequency - Max:	6GHz

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Coaxial Connectors (RF)

Coaxial connectors, also known as RF connectors, are devices used to connect coaxial cables and other types of transmission lines. They are typically used in radio frequency (RF) applications such as television, radio broadcasting, and cellular communications. The 908-41400 connector is a coaxial connector that can handle data rates up to 1100 MHz and is configured for Impedance of 50 ohms (non-standard).

Application Field

The 908-41400 is most commonly used in cellular communications such as 3G, 4G, and LTE networks due to its ability to reliably transfer data at high speeds over long distances. It is also used in applications such as Wi-Fi, IEEE 802.11, and LAN/WAN. Additionally, it is used for broadcast television, microwave communications, satellite dishes, military and avionics, CCTV equipment, and medical imaging.

Working Principle

The 908-41400 coaxial connector is designed to allow signal and power to flow through it uninterrupted. It consists of two components: the male connector and the female connector. The male connector is usually located on the cable, while the female connector is located at the device. In order for the two connectors to work, a coaxial cable must also be used to form a continuous signal path. Coaxial cables are made up of a dielectric material, usually air, polyethylene, or foam, that is covered by a braided or solid metal shield. The braided or solid metal shield helps to reduce RF interference by providing a low impedance path to the ground. The 908-41400 connector has a pin that is connected to the center conductor of the cable, which is surrounded by the dielectric material, providing a low resistance electrical connection. At the same time, the outer contact forms an electrical connection with the outer conductor of the cable, providing a low inductance connection.

Conclusion

The 908-41400 coaxial connector is used in a variety of applications due to its high-speed data transfer capacity and ability to reduce RF interference. Its working principle relies on an uninterrupted electrical signal path being formed between the male connector on the cable and the female connector located at the device. In order to form this continuous signal path, a dielectric material covered by a metal shield is used to form a low-impedance electrical connection.

The specific data is subject to PDF, and the above content is for reference