Allicdata Part #: | 98-0282-ND |
Manufacturer Part#: |
98-0282 |
Price: | $ 0.00 |
Product Category: | Integrated Circuits (ICs) |
Manufacturer: | Infineon Technologies |
Short Description: | IC MOSFET LS DRIVER 5A SOT-223 |
More Detail: | N/A |
DataSheet: | 98-0282 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Voltage - Supply (Vcc/Vdd): | Not Required |
Base Part Number: | IPS021L |
Supplier Device Package: | SOT-223 |
Package / Case: | TO-261-4, TO-261AA |
Operating Temperature: | -40°C ~ 150°C (TJ) |
Fault Protection: | Current Limiting (Fixed), Over Temperature |
Features: | -- |
Input Type: | Non-Inverting |
Rds On (Typ): | 130 mOhm |
Current - Output (Max): | 1.4A |
Series: | -- |
Voltage - Load: | 35V (Max) |
Interface: | On/Off |
Output Type: | N-Channel |
Output Configuration: | Low Side |
Ratio - Input:Output: | 1:1 |
Number of Outputs: | 1 |
Switch Type: | General Purpose |
Part Status: | Obsolete |
Packaging: | Tube |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
A PMIC, or Power Management Integrated Circuit, is a device that is used to monitor and control the flow of power in a system. It can be used to turn power on or off in the system, or to regulate the voltage and current that is supplied to different parts of the system. The 98-0282 application field and working principle are a particular example of a PMIC that is designed to do both.
The 98-0282 is a PMIC that is designed to be used as a power distribution switch and load driver in electronic systems. It is designed to be integrated into the circuitry of a device, and can be used to selectively and safely distribute power to different parts of the system. The primary benefit of this type of PMIC is that it is capable of controlling the current and voltage of each part of the system, and can turn off power to protect the system from accidental damage.
The 98-0282 is also capable of providing a “load-driving” function. This means that it is capable of providing power to parts of the system at higher current and voltage levels than the standard supply voltages. This type of power can be used to provide higher performance or to increase the power capabilities of a system. It is also useful for enabling different parts of the system to communicate when they are running at different voltages.
The 98-0282 is a fully programmable PMIC. This means that it can be programmed to do different tasks. For example, it can be programmed to control the flow of power in different parts of the system, to adjust the voltage and current levels, and even to turn off power to specific parts of the system in order to protect them from accidental damage. It can also be programmed to provide feedback to the user about the power distribution in the system.
The 98-0282 also features a number of features that make it ideal for use in electronic systems. It has an improved motor speed control and surge protection capability, and it can also be used to provide power to a wide range of electronic components, such as LEDs, relays, resistors, transistors, and capacitors. It is also compatible with a wide range of power management standards, such as IEC/EN/UL-approved models.
In conclusion, the 98-0282 is a powerful and versatile PMIC. It can be used to provide power distribution and load driving in electronic systems, as well as a number of other features. It is programmable, and can be used to monitor the power distribution in the system, as well as to protect the system from accidental damage. It is also compatible with a broad range of power management standards and components.
The specific data is subject to PDF, and the above content is for reference
EXPRESS CARD PWR SWITCH
PSC LOAD SWITCH V-DFN3030-10
IC DARL DRIVER ARRAY 4CH
IC USB POWER SWITCH 8MSOP
IC SW IPS 1CH HIGH SIDE D2PAK-5
IC SW IPS 1CH HIGH SIDE 8SOIC