Allicdata Part #: | 1003-1950-ND |
Manufacturer Part#: |
980-2000-353 |
Price: | $ 5.95 |
Product Category: | Connectors, Interconnects |
Manufacturer: | ITT Cannon, LLC |
Short Description: | BACKSHELL DB37 METALIZED PLASTIC |
More Detail: | 37 Position Two Piece Backshell Connector Silver 1... |
DataSheet: | 980-2000-353 Datasheet/PDF |
Quantity: | 428 |
Lead Free Status / RoHS Status: | Vendor undefined / Vendor undefined |
1 +: | $ 5.40540 |
10 +: | $ 5.16978 |
100 +: | $ 4.34732 |
250 +: | $ 3.87735 |
500 +: | $ 3.64234 |
1000 +: | $ 3.21936 |
Specifications
Series: | -- |
Part Status: | Active |
Lead Free Status / RoHS Status: | -- |
Accessory Type: | Two Piece Backshell |
Number of Positions: | 37 |
Cable Type: | Round |
Cable Exit: | 180° |
Shielding: | Shielded |
Material: | Thermoplastic |
Plating: | Nickel |
Hardware: | Cable Clamp |
Features: | -- |
Color: | Silver |
Description
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
980-2000-353 Application Field and Working PrincipleThe 980-2000-353 D-sub backshell is a type of electronic connector primarily used in computers and other electronic equipment. It provides a basic form of physical connection between two devices, allowing them to be easily connected and disconnected. This type of connector is very common in the electronics industry. A D-sub connector is made up of a rectangular backshell, which fits onto the outside of a device, and a hood, which fits onto the inside of the device. The D-sub backshell is typically made from plastic and will feature a number of contacts on the front and back panels. The contacts are designed to fit into the corresponding slots on the hood of the device. The contacts are generally made of copper and will be insulated by a thin layer of rubber or plastic so that they will not short out when in contact with other components.The backshells and hoods of the 980-2000-353 D-sub connectors are designed to prevent the connectors from becoming unstable in the event of a sudden movement or vibration. For this reason, the hoods are usually held in place by screws, while the backshells can be secured by a variety of different mechanisms. These may include spring clips, thumbscrews, slide locks, or clips that fit over the sides of the hood.When the 980-2000-353 D-sub backshell is connected to a device, the contacts must make good contact with the terminals in order to ensure a reliable connection. This is achieved by pressing the contacts together with sufficient force to ensure that no air gap is present. This ensures that the contact between the terminals is maintained, and that any vibration or movement will not affect the connection.The 980-2000-353 D-sub backshell is designed for a variety of applications, including telecommunications, computers, industrial and consumer electronics, laboratory equipment, and audio/visual equipment. These connectors are also popular in the automotive industry, where they are used to connect sensors, controls, radios, and other components. In general, these connectors are used to connect two devices that require a reliable, low-cost connection.The 980-2000-353 D-sub backshell is a reliable, low-cost option that is simple to install and maintain. In addition, the contacts are easily accessible on the backshell, making it easy to inspect, clean, and re-connect the devices. As a result, this type of connector is a convenient and cost-effective choice for a variety of applications.The specific data is subject to PDF, and the above content is for reference
Latest Products
DX-68-CV7(02)
BACKSHELL 68POSPosition Connector
DX-68-CV1
CONN HOOD 68PINPosition Connector
DX-80-CV1
CONN HOOD 80PINPosition Connector
DA20961R
DSUB JUNCTION SHELLPosition Connector
165X10949X
CONN BACKSHELL 50POS C/W 4-4050 Position...
1731110107
FCT HOOD S1 70 DEG SHLD PLSTC W/9 Positi...