995005

Mounting Type:	Through Hole
Screw Thread:	M3
Torque - Screw:	0.5-0.6 Nm (4.4-5.3 Lb-In)
Screw Material - Plating:	--
Clamp Material - Plating:	--
Contact Material - Plating:	Copper Alloy - Tin Plated
Housing Material:	Polyamide (PA66), Nylon 6/6
Operating Temperature:	-20°C ~ 100°C
Color:	Orange
Features:	Interlocking (Side)
Wire Termination:	Screw - Clamping Yoke, Tension Sleeve
Series:	Omnimate LP
Wire Gauge:	12-26 AWG
Voltage:	300V
Current:	15A
Mating Orientation:	Horizontal with Board
Pitch:	0.197" (5.00mm)
Positions Per Level:	7
Number of Levels:	1
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Terminal blocks are a type of electrical connection device, commonly referred to as a terminal. It is a type of wire-to-board connection system used to electrically connect multiple wires or conductors. A terminal block is specifically designed to terminate and connect a collection of wires, while providing a reliable connection and maintaining a compact form factor. The most common type of terminal blocks are named “Screw Terminals”, as screws are the most common ways to secure each wire in the terminal. Terminal blocks come in a variety of shapes, sizes, and configurations. However, each terminal block typically contains a base or block, contact material (e.g. copper, brass, steel), and studs or screws for easy wire connection. Depending upon the application, terminal blocks can be used to connect several hundred different wires in a single connection, allowing multiple signals to be routed through a single connection point. 995005 terminal blocks are a type of “Push-in” terminal blocks - a type of terminal block designed to allow for a quick and secure connection between two or more wires with a push-in connection. They typically consist of a plastic housing and two to several connection points to accommodate one or more wires. The contact points can differ in design, based on the application. They can be made of high-temperature rated materials such as brass, copper, and other metals to ensure reliable electrical connections and performance. Furthermore, they can be polarized, which allows for only one connection direction, or non-polarized which allows for two connection directions. 995005 terminal blocks are typically used in applications where one or several wires need to be securely connected in a concise, yet accessible manner. The “Push-in” terminal blocks allow for easy installation and serviceability, which makes them well-suited for industrial applications or environments with frequent wire changes or updates. Typical applications include process control systems, motor control systems, programmable logic controllers (PLCs), and other industrial process automation systems. The working principle of a 995005 terminal block is simple - the steel needle of the contact pin is pushed into the wire insulation and pressed against the copper contact. The pressure of the contact then clamps the wire firmly in place, creating an uninterrupted and secure connection between the two contacts. In addition, the contact has a certain level of spring force, which assists in keeping the connection secure, and also prevents oxyhydrogen welding from occurring due to high temperatures. In summary, 995005 terminal blocks are a type of wire-to-board connection system designed to make quick and secure connections between multiple wires or conductors. They are typically used in applications where one or several wires need to be securely connected in a concise and accessible manner, and their one-piece design makes them easy to install, service, and maintain. The working principle of 995005 terminal blocks is simple - the steel needle of the contact pin is pushed into the wire insulation and pressed against the copper contact, creating an uninterrupted and secure connection.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description