Allicdata Part #: | 887-1013-ND |
Manufacturer Part#: |
9B-12.000MAAJ-B |
Price: | $ 0.27 |
Product Category: | Crystals, Oscillators, Resonators |
Manufacturer: | TXC Corporation |
Short Description: | CRYSTAL 12.0000MHZ 18PF T/H |
More Detail: | 12MHz ±30ppm Crystal 18pF 40 Ohms HC-49/US |
DataSheet: | 9B-12.000MAAJ-B Datasheet/PDF |
Quantity: | 2760 |
1 +: | $ 0.24570 |
10 +: | $ 0.20475 |
50 +: | $ 0.18434 |
100 +: | $ 0.16380 |
500 +: | $ 0.15561 |
1000 +: | $ 0.13104 |
2500 +: | $ 0.12285 |
5000 +: | $ 0.11876 |
10000 +: | $ 0.11466 |
Series: | 9B |
Packaging: | Bulk |
Part Status: | Active |
Type: | MHz Crystal |
Frequency: | 12MHz |
Frequency Stability: | ±30ppm |
Frequency Tolerance: | ±30ppm |
Load Capacitance: | 18pF |
ESR (Equivalent Series Resistance): | 40 Ohms |
Operating Mode: | Fundamental |
Operating Temperature: | -20°C ~ 70°C |
Ratings: | -- |
Mounting Type: | Through Hole |
Package / Case: | HC-49/US |
Size / Dimension: | 0.453" L x 0.197" W (11.50mm x 5.00mm) |
Height - Seated (Max): | 0.145" (3.68mm) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Crystals
Crystals are a type of material that have a closely-packed lattice structure, allowing a wide range of properties to be displayed such as optical and electrical properties. Crystals can be crystalline or amorphous and come in many different shapes and sizes. They are used in many applications from watches to medical and industrial applications.
9B-12.000MAAJ-B Application Field and Working Principle
The 9B-12.000MAAJ-B is a crystal oscillator designed to serve as an electromechanical device that converts a voltage signal into mechanical energy. It is used in a wide range of applications, including communications, industrial, and medical equipment.
The 9B-12.000MAAJ-B oscillator is a type of crystal that uses a special AT-cut quartz crystal. The quartz crystal is made up of four elements – Oxygen, Silicon, Iron, and Aluminum – which form a lattice structure. The lattice structure allows for the crystalline resonance to occur when subjected to a voltage signal.
The AT-cut quartz crystal is used for this oscillator as it has a fixed axis of vibration that gives it a higher frequency than normal quartz crystals. This higher frequency allows for more accurate timing as the frequencies produced are much more stable than non-AT-cut crystals.
The 9B-12.000MAAJ-B oscillator consists of an interrupter, a resonance circuit, and a quartz crystal. The interrupter works by converting the AC voltage applied to the crystal into a DC voltage. This DC voltage is then used to resonate the quartz crystal, resulting in a frequency output.
The resonance circuit is used to maintain the frequency of the output. The quartz crystal is capable of resonance frequencies anywhere between 9 – 12MHz. This makes it ideal for a variety of applications such as miniaturization and cell phone use.In addition, the 9B-12.000MAAJ-B oscillator is capable of operating at both high temperatures and low temperatures. This makes it suitable for use in medical and industrial applications.The 9B-12.000MAAJ-B is also known for its robustness as it is capable of withstanding both shock and vibration. This makes it ideal for use in portable and military applications.
Overall, the 9B-12.000MAAJ-B oscillator is an ideal choice for many applications due to its robust design, stable frequency output, and wide range of operating temperatures. It is a versatile crystal oscillator that can be used in a variety of applications.
The specific data is subject to PDF, and the above content is for reference
Crystal 8.59MHz 39pF 3-Pin CSMD T/R - Ta...
CRYSTAL 52.000 MHZ 12PF SMT52MHz 15ppm C...
CRYSTAL 50.000 MHZ 8PF SMT50MHz 15ppm Cr...
CRYSTAL 48.000 MHZ 8PF SMT48MHz 20ppm Cr...
CRYSTAL 44.000 MHZ 6PF SMT44MHz 20ppm Cr...
CRYSTAL 40.610 MHZ SERIES SMT40.61MHz 15...