Allicdata Part #: | 887-1019-ND |
Manufacturer Part#: |
9B-16.000MAAJ-B |
Price: | $ 0.27 |
Product Category: | Crystals, Oscillators, Resonators |
Manufacturer: | TXC Corporation |
Short Description: | CRYSTAL 16.0000MHZ 18PF T/H |
More Detail: | 16MHz ±30ppm Crystal 18pF 30 Ohms HC-49/US |
DataSheet: | 9B-16.000MAAJ-B Datasheet/PDF |
Quantity: | 1863 |
1 +: | $ 0.24570 |
10 +: | $ 0.20475 |
50 +: | $ 0.18434 |
100 +: | $ 0.16380 |
500 +: | $ 0.15561 |
1000 +: | $ 0.13104 |
2500 +: | $ 0.12285 |
5000 +: | $ 0.11876 |
10000 +: | $ 0.11466 |
Series: | 9B |
Packaging: | Bulk |
Part Status: | Active |
Type: | MHz Crystal |
Frequency: | 16MHz |
Frequency Stability: | ±30ppm |
Frequency Tolerance: | ±30ppm |
Load Capacitance: | 18pF |
ESR (Equivalent Series Resistance): | 30 Ohms |
Operating Mode: | Fundamental |
Operating Temperature: | -20°C ~ 70°C |
Ratings: | -- |
Mounting Type: | Through Hole |
Package / Case: | HC-49/US |
Size / Dimension: | 0.453" L x 0.197" W (11.50mm x 5.00mm) |
Height - Seated (Max): | 0.145" (3.68mm) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Crystals are substances that are composed of individual atoms arranged in a highly ordered pattern that repeats itself in three-dimensional space. They are distinguished from polycrystals, which are made up of many individual crystallites that are randomly don\'t. Crystals are found in all shapes and sizes, from individuals too large that the eye can see two smaller than a microscope can image.
9B-16.000MAAJ-B is used for frequency control. It is one of the popular and widely used Quartz filters. This filter is composed of two of the most common quartz crystal cuts: the AT cut and the TC cut.
The AT cut is the most common type of quartz used in electronics. It is very consistent and has high stability. It is made using a thin wafer of quartz that is cut at a specific angle to create a resonance. This resonance allows the quartz crystal to oscillate at a specific frequency when it is exposed to an alternating electric field. The frequency of oscillation is determined by the dimensions of the quartz and the angle of the cut.
The TC cut is a hybrid of the AT cut and the AT/AO cut. It is made by cutting a thin wafer of quartz in two directions at an angle. This creates two resonances in the quartz, one at the AT cut frequency and one at the angle frequency. The angle frequency is determined by the angle of the two cuts. It is much less stable than the AT cut but is especially suited for low-frequency applications.
9B-16.000MAAJ-B is used in frequency control applications, including tuning circuits and amplifiers. It is capable of operating from -20°C to +75°C, and has a maximum drive level of 500mW. It also has a tolerance of ±30 ppm over 0°C to 55°C.
The working principle of the 9B-16.000MAAJ-B is similar to that of other quartz crystals. It is composed of two quartz crystals, each cut at specific angles to create resonances. When the crystal is placed in an alternating current, it will vibrate at the resonant frequency and the oscillation will be sustained. This oscillation is used to control the frequency and phase of a signal, depending on the application.
The 9B-16.000MAAJ-B is a versatile quartz filter and can be used in many different applications. It is simple to use and provides accurate frequency control for a wide range of applications. Its small size makes it easy to integrate into a circuit, and its precise oscillation characteristics make it an ideal choice for many frequency control applications.
The specific data is subject to PDF, and the above content is for reference
Crystal 8.59MHz 39pF 3-Pin CSMD T/R - Ta...
CRYSTAL 52.000 MHZ 12PF SMT52MHz 15ppm C...
CRYSTAL 50.000 MHZ 8PF SMT50MHz 15ppm Cr...
CRYSTAL 48.000 MHZ 8PF SMT48MHz 20ppm Cr...
CRYSTAL 44.000 MHZ 6PF SMT44MHz 20ppm Cr...
CRYSTAL 40.610 MHZ SERIES SMT40.61MHz 15...