Allicdata Part #: | 887-1268-2-ND |
Manufacturer Part#: |
9C-12.000MEEJ-T |
Price: | $ 0.20 |
Product Category: | Crystals, Oscillators, Resonators |
Manufacturer: | TXC Corporation |
Short Description: | CRYSTAL 12.0000MHZ 18PF SMD |
More Detail: | 12MHz ±10ppm Crystal 18pF 40 Ohms HC-49/US |
DataSheet: | 9C-12.000MEEJ-T Datasheet/PDF |
Quantity: | 2000 |
1000 +: | $ 0.18144 |
3000 +: | $ 0.17010 |
5000 +: | $ 0.16443 |
10000 +: | $ 0.15876 |
Series: | 9C |
Packaging: | Tape & Reel (TR) |
Part Status: | Active |
Type: | MHz Crystal |
Frequency: | 12MHz |
Frequency Stability: | ±10ppm |
Frequency Tolerance: | ±10ppm |
Load Capacitance: | 18pF |
ESR (Equivalent Series Resistance): | 40 Ohms |
Operating Mode: | Fundamental |
Operating Temperature: | -20°C ~ 70°C |
Ratings: | -- |
Mounting Type: | Surface Mount |
Package / Case: | HC-49/US |
Size / Dimension: | 0.449" L x 0.189" W (11.40mm x 4.80mm) |
Height - Seated (Max): | 0.161" (4.10mm) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
9C-12.000MEEJ-T Application Field and Working Principle
9C-12.000MEEJ-T crystals are miniature crystal oscillators commonly used as frequency sources in microcontroller applications. These crystals enable low cost, low power and low height solutions. The basic operating principle of a crystal resonator is based on the piezoelectric effect, in which the crystal material generates an electric field when subject to physical deformation or stress. This effect is reversible, and an applied electric field can cause the crystal to vibrate at a specific frequency.
Oscillators with 9C-12.000MEEJ-T crystals are used in a wide variety of applications, such as wireless communication, computer peripherals, embedded systems, and electronic toys and games. They are also used in embedded systems for timekeeping, temperature monitoring, and data synchronization.
The frequency stability of these crystals depends on the cut and construction of the material, and can vary depending on the oscillator\'s layout. The frequency stability of the crystals can be optimized by the use of specialized capacitors and inductors, as well as temperature compensation circuitry. Oscillators with 9C-12.000MEEJ-T crystals are generally more reliable than oscillators based on other frequency sources, such as quartz crystal oscillators.
The design of an oscillator with a 9C-12.000MEEJ-T crystal is relatively simple. It consists of a voltage amplifier and a capacitive reactance circuit, known as a tank circuit. This circuit is tuned to the frequency of the crystal, and the amplifier is used to provide a signal with the required amplitude and power level. The frequency of the signal is determined by the series or parallel combination of resistors, capacitors and the crystal, and is affected by the value of the reactance.
In addition to the oscillator, a 9C-12.000MEEJ-T crystal can also be used as a frequency reference in clock and timing applications. In this case, the crystal is connected directly to the clock input of a microcontroller. The frequency of the crystal can be programmed by selecting the appropriate crystal control bits. The circuit is designed to generate the correct frequency stabilized signal when the crystal is in resonance.
9C-12.000MEEJ-T crystals are ideal for cost sensitive applications, where low power consumption and a low cost solution are required. They have the advantage of requiring fewer external components than other frequency sources, resulting in smaller and less expensive equipment.
The specific data is subject to PDF, and the above content is for reference
Crystal 8.59MHz 39pF 3-Pin CSMD T/R - Ta...
CRYSTAL 52.000 MHZ 12PF SMT52MHz 15ppm C...
CRYSTAL 50.000 MHZ 8PF SMT50MHz 15ppm Cr...
CRYSTAL 48.000 MHZ 8PF SMT48MHz 20ppm Cr...
CRYSTAL 44.000 MHZ 6PF SMT44MHz 20ppm Cr...
CRYSTAL 40.610 MHZ SERIES SMT40.61MHz 15...