9C-16.000MAHK-T

Series:	9C
Part Status:	Active
Type:	MHz Crystal
Frequency:	16MHz
Frequency Stability:	±30ppm
Frequency Tolerance:	±30ppm
Load Capacitance:	20pF
ESR (Equivalent Series Resistance):	30 Ohms
Operating Mode:	Fundamental
Operating Temperature:	-40°C ~ 85°C
Ratings:	--
Mounting Type:	Surface Mount
Package / Case:	HC-49/US
Size / Dimension:	0.449" L x 0.189" W (11.40mm x 4.80mm)
Height - Seated (Max):	0.161" (4.10mm)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Crystals have been used in applications ranging from radio communications to medical imaging. The 9C-16.000MAHK-T is a unique application that combines a crystal oscillator with a Schmitt trigger to form a device suitable for audio and digital logic applications.The 9C-16.000MAHK-T is a parallel-resonant, free-running crystal oscillator housed in an industry-standard 9x14mm package. It consists of a 16.000MHz resonator, a selectable Schmitt trigger, an integrated capacitor, and a transistor amplifier. With its low current consumption, the 9C-16.000MAHK-T is well-suited for handheld and portables, as well as for low-power microcontroller systems.The 9C-16.000MAHK-T operates by using a transistor amplifier to drive a 16.000MHz quartz crystal. The crystal converts electrical signals into mechanical vibrations. These vibrations are then amplified and converted back into electrical signals. The crystal oscillator works by using positive feedback to maintain oscillation.The Schmitt trigger in the 9C-16.000MAHK-T provides a selectable voltage level for the comparator which increases the noise immunity of the device. It works by comparing the input to an adjustable threshold and if the input is higher than the threshold, the output is a logical high, and if lower it is a logical low.The integrated capacitor of the 9C-16.000MAHK-T is a standard tool in crystal oscillator design and is used to control the oscillator frequency and maintain stability. It consists of two connected plates separated by a dielectric material. When an electrical signal is applied, the capacitor takes on a charge, creating a signal on the plate, which is then fed back to the oscillator for oscillation.The 9C-16.000MAHK-T device is an important part of any bridge or timing system, such as high-frequency radio and television broadcasting, computers and other digital electronics, medical systems, automotive systems, and other industrial and consumer electronics. It is a versatile, cost-effective solution for a wide range of applications. The 9C-16.000MAHK-T is a dependable, accurate, and convenient source of 16.000MHz frequency and provides reliable timing. It delivers excellent long-term stability and is well-suited for use in both high-frequency and low-frequency applications. Additionally, it consumes very low power, making it ideal for use in portable and battery-powered systems. The 9C-16.000MAHK-T is versatile, reliable, and easy to use. With its low cost and low current consumption, it is an excellent choice for a wide range of applications. Its combination of an oscillator and a Schmitt trigger make it ideal for audio, digital logic, and other applications.

The specific data is subject to PDF, and the above content is for reference