9C-19.6608MAAJ-T Crystals, Oscillators, Resonators

Series:	9C
Packaging:	Tape & Reel (TR)
Part Status:	Active
Type:	MHz Crystal
Frequency:	19.6608MHz
Frequency Stability:	±30ppm
Frequency Tolerance:	±30ppm
Load Capacitance:	18pF
ESR (Equivalent Series Resistance):	30 Ohms
Operating Mode:	Fundamental
Operating Temperature:	-20°C ~ 70°C
Ratings:	--
Mounting Type:	Surface Mount
Package / Case:	HC-49/US
Size / Dimension:	0.449" L x 0.189" W (11.40mm x 4.80mm)
Height - Seated (Max):	0.161" (4.10mm)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Crystals: 9C-19.6608MAAJ-T Application Field and Working Principle

Crystals, or quartz crystals, are one of the most fascinating and advanced materials used in electronics today. A 9C-19.6608MAAJ-T quartz crystal is a miniature resonator that consists of a tiny piece of quartz kept in a quartz oscillator circuit. It is used to produce an extremely accurate frequency signal, which is then used to control the operations in various types of electronic equipment.

Application Field

The 9C-19.6608MAAJ-T crystal is primarily used for timing in electronic watches, clocks, and computers. However, it is also very useful for applications such as computers, consumer electronics, signal processing, and communications equipment. It is an ideal choice for driving synchronous AC motors, controlling the speed of digital modulation, and generating signals for synchronous data transmission. It is also an important component used in LCD panel controllers and RF transmitter circuits.

Working Principle

The working principle behind the 9C-19.6608MAAJ-T quartz crystal is based on quartz oscillator circuits. The most common type of oscillator uses a quartz crystal as a resonator, which vibrates at a very precise frequency when a voltage is applied to it. This frequency is then used to control the timing and other aspects of the circuit. The quartz crystal consists of two thin layers of quartz separated by a thin permeable material. When an electric field is applied to the crystal, the quartz layers flex, causing a detectable change in the electrical field. This change in the electric field is then used to generate a periodic signal that is fed back to the oscillator circuit. The frequency of this oscillation is predetermined by the design of the quartz crystal, and is very accurate and consistent. In the 9C-19.6608MAAJ-T, the frequency of oscillation is 19.6608 MHz. This frequency is determined by the geometry of the quartz crystal and its associated circuitry. The accuracy of this frequency is very important for many applications, as it allows for precise timing and synchronization of circuits.

Conclusion

The 9C-19.6608MAAJ-T quartz crystal is a reliable and precise component, used in many different types of electronic equipment. It is used to create a very accurate and consistent frequency of oscillation, which is then used to control the timing and operations of various types of electronic equipment. It is important for users to understand the application field and working principle of this component, as this can help them to determine whether it is the right choice for their application.

The specific data is subject to PDF, and the above content is for reference