Allicdata Part #: | 887-1951-2-ND |
Manufacturer Part#: |
9C-54.000MBBK-T |
Price: | $ 0.21 |
Product Category: | Crystals, Oscillators, Resonators |
Manufacturer: | TXC Corporation |
Short Description: | CRYSTAL 54.0000MHZ 20PF SMD |
More Detail: | 54MHz ±50ppm Crystal 20pF 60 Ohms HC-49S |
DataSheet: | 9C-54.000MBBK-T Datasheet/PDF |
Quantity: | 1000 |
1000 +: | $ 0.18900 |
Series: | 9C |
Packaging: | Tape & Reel (TR) |
Part Status: | Active |
Type: | MHz Crystal |
Frequency: | 54MHz |
Frequency Stability: | ±50ppm |
Frequency Tolerance: | ±50ppm |
Load Capacitance: | 20pF |
ESR (Equivalent Series Resistance): | 60 Ohms |
Operating Mode: | 3rd Overtone |
Operating Temperature: | -20°C ~ 70°C |
Ratings: | -- |
Mounting Type: | Surface Mount |
Package / Case: | HC-49S |
Size / Dimension: | 0.449" L x 0.189" W (11.40mm x 4.80mm) |
Height - Seated (Max): | 0.161" (4.10mm) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
9C-54.000MBBK-T Application Field and Working Principle
The 9C-54.000MBBK-T crystal is a type of high performance quartz crystal which can be used in a variety of applications. Its small size and low cost make it an attractive choice for many industrial and commercial applications. It has a stable frequency and is used in precision electronics such as timing, frequency synthesis, and circuitry control.
This crystal is made up of two single-terminal crystals mounted on the same substrate. Each of the crystals has a frequency adjustment peripheral to its substrate. This adjustment allows for greater tuning accuracy and greater flexibility when designing a complex circuitry. The dielectrics used in these crystals are high quality and can achieve very precise tuning for the circuitry.
The 9C-54.000MBBK-T is used in many electronic applications such as audio and video systems, oscilloscopes and various communication devices. It is also suitable for use in watches, timers, and microprocessors, as well as for general communication and radiolocation. These crystals provide precise timing and accurate control of circuits and components.
The working principle involved in the 9C-54.000MBBK-T is based on an electromechanical process. Each crystal has two parts: an oscillator, which generates an electrical signal, and an amplifier, which amplifies the signal and provides it with a proper gain and frequency. The amplitude of the signal is regulated through an external capacitor connected to the oscillator.
The oscillator generates a periodic signal with a frequency determined by the external capacitor. This signal is then amplified and sent to the output. The frequency of the output signal is determined by the capacitance of the capacitor. The amplifiers provide a wide range of frequencies and gains and therefore can be used in different types of electronic applications.
The 9C-54.000MBBK-T is extremely sensitive and requires precise adjustment for accurate operation. It is important to pay special attention to the setting of the capacitance as this will affect the performance of the system. Also, if the oscillator is not properly tuned, it may cause disruptions or incorrect operation of the circuit.
In conclusion, the 9C-54.000MBBK-T is a type of high performance quartz crystal which is widely used in various electronic applications. Its small size and low cost make it a very attractive choice for industrial and commercial applications. The two parts inside the crystal work together to create and amplify an electrical signal with a precise frequency determined by an external capacitor. This signal is then sent to the output for the operation of the circuit.
The specific data is subject to PDF, and the above content is for reference
Crystal 8.59MHz 39pF 3-Pin CSMD T/R - Ta...
CRYSTAL 52.000 MHZ 12PF SMT52MHz 15ppm C...
CRYSTAL 50.000 MHZ 8PF SMT50MHz 15ppm Cr...
CRYSTAL 48.000 MHZ 8PF SMT48MHz 20ppm Cr...
CRYSTAL 44.000 MHZ 6PF SMT44MHz 20ppm Cr...
CRYSTAL 40.610 MHZ SERIES SMT40.61MHz 15...