Allicdata Part #: | 9C-9.84375MBGQ-T-ND |
Manufacturer Part#: |
9C-9.84375MBGQ-T |
Price: | $ 0.16 |
Product Category: | Crystals, Oscillators, Resonators |
Manufacturer: | TXC Corporation |
Short Description: | CRYSTAL 9.84375MHZ 10PF SMD |
More Detail: | 9.8437MHz ±50ppm Crystal 10pF 80 Ohms HC-49/US |
DataSheet: | 9C-9.84375MBGQ-T Datasheet/PDF |
Quantity: | 1000 |
1000 +: | $ 0.15120 |
Series: | 9C |
Part Status: | Active |
Type: | MHz Crystal |
Frequency: | 9.8437MHz |
Frequency Stability: | ±50ppm |
Frequency Tolerance: | ±50ppm |
Load Capacitance: | 10pF |
ESR (Equivalent Series Resistance): | 80 Ohms |
Operating Mode: | Fundamental |
Operating Temperature: | -40°C ~ 85°C |
Ratings: | -- |
Mounting Type: | Surface Mount |
Package / Case: | HC-49/US |
Size / Dimension: | 0.449" L x 0.189" W (11.40mm x 4.80mm) |
Height - Seated (Max): | 0.161" (4.10mm) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Introduction to Crystals
Crystals, or more precisely piezoelectric crystals, are widely used in many important applications, including precision timing, alignment and frequency control. Piezoelectric crystals are used in the production of oscillators, sensors and oscillators, seismic systems and iBeacons. Piezoelectricity is the electrical charge produced in certain materials when subjected to mechanical stress.
9C-9.84375MBGQ-T Application Field and Working Principle
A 9C-9.84375MBGQ-T oscillator is commonly used in timing and frequency control applications, such as those found in telecommunications networks. It uses quartz crystal as an element to measure and control the time interval between pulses. The 9C-9.84375MBGQ-T oscillator utilizes a 9.84375 MHz quartz crystal in an open-loop control circuit. The quartz crystal is used because it has an inherent frequency stability and is able to perform over a wide temperature range.
The quartz crystal used in the 9C-9.84375MBGQ-T oscillator operates based on the piezoelectric effect. When a voltage is applied to the quartz crystal, the crystal expands and contracts in the direction of the applied voltage. This expansion and contraction generates a mechanical strain that produces an electrical potential. When the potential changes, it affects the frequency at which the crystal oscillates.
The 9C-9.84375MBGQ-T oscillator uses the 9.84375 MHz quartz crystal in a simple oscillator circuit. The circuit consists of an amplifier and feedback loop that is used to control the crystal\'s frequency of oscillation. This oscillator circuit is designed to maintain the frequency of oscillation at a constant level. By doing so, the frequency is extremely stable and can be used in precision timing and frequency control applications.
The 9C-9.84375MBGQ-T oscillator is used in a wide variety of applications, such as timing, frequency control, and alignment. It is used in telecommunications networks, precision timing equipment, and other systems that require accurate and stable frequency control. The 9C-9.84375MBGQ-T is a low-cost, low-power oscillator that is ideal for use in these applications.
Conclusion
In conclusion, the 9C-9.84375MBGQ-T oscillator is a low-cost, low-power oscillator that utilizes quartz crystal in an open-loop control circuit. The crystal utilizes the piezoelectric effect to generate an electrical potential, which is then used to control the frequency of oscillation. The 9C-9.84375MBGQ-T oscillator is used in a variety of applications including telecommunications, precision timing, and alignment. Its ability to maintain an accurate and stable frequency makes it ideal for these applications.
The specific data is subject to PDF, and the above content is for reference
Crystal 8.59MHz 39pF 3-Pin CSMD T/R - Ta...
CRYSTAL 52.000 MHZ 12PF SMT52MHz 15ppm C...
CRYSTAL 50.000 MHZ 8PF SMT50MHz 15ppm Cr...
CRYSTAL 48.000 MHZ 8PF SMT48MHz 20ppm Cr...
CRYSTAL 44.000 MHZ 6PF SMT44MHz 20ppm Cr...
CRYSTAL 40.610 MHZ SERIES SMT40.61MHz 15...