A-TB100-HG03

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Terminal blocks, also known as terminal strips, are used to connect electrical wires from one device to another. The A-TB100-HG03 is one such terminal block, used for wire-to-board connections. It is designed to meet specific applications and is used in various industries. This article will focus on the application fields and working principles associated with the A-TB100-HG03.

The A-TB100-HG03 is a 9.5 mm pitch terminal block with an ABS housing. It is designed to accommodate up to four mm wires. The terminal block is available in two versions: the standard A-TB100-HG03 and the A-TB100-HG03-2. The standard version consists of a 2.54 mm mating pitch and a 2.0 mm upper contact pitch. The A-TB100-HG03-2 consists of a larger upper contact section. Both versions have a gray housing and are designed for indoor use.

The A-TB100-HG03 is often used in mechanical equipment, industrial automation, lights and signals, test and measurement, security systems, and HVAC applications. In these applications, the terminal block can be used to provide power and control signals. In addition, the A-TB100-HG03 is also used in the automotive industry for vehicle lighting, navigation, infotainment, and safety systems.

The A-TB100-HG03 works on the principle of providing a secure connection between two electrical wires. This is accomplished by using a series of contact “fingers” that are embedded in the block. The contacts are designed to interlock with two wires, providing a secure connection that is resistant to vibration and wear. The connection is also designed to be resistant to corrosion and short-circuiting.

The A-TB100-HG03 also has a locking mechanism. This mechanism is used to ensure a secure connection and prevent accidental disconnection. The locking mechanism consists of a spring-loaded plunger that inserts into the block and locks into place when a wire is inserted. To prevent accidental unlocking, the plunger can only be released when a special key is used.

To install the A-TB100-HG03, the user must first strip the insulation from the wires that need to be connected. The exposed conductors are then inserted into the appropriate contact “fingers” of the terminal block and secured by tightening the terminal screws. Finally, the plunger is inserted and locked into place, ensuring a secure connection between the two wires.

In conclusion, the A-TB100-HG03 is a 9.5 mm pitch terminal block with an ABS housing. It is designed to accommodate up to four mm wires for wire-to-board connections. The block is used in various applications, including mechanical equipment, industrial automation, lights and signals, test and measurement, security systems, HVAC systems, and automotive applications. It works on the principle of providing a secure connection between two electrical wires using a series of contact “fingers”. To install, the user must first strip the insulation from the wires, insert them into the appropriate contact “fingers”, and lock the plunger to ensure a secure connection.

The specific data is subject to PDF, and the above content is for reference