| Allicdata Part #: | A-TB750-HG05-ND |
| Manufacturer Part#: |
A-TB750-HG05 |
| Price: | $ 0.90 |
| Product Category: | Connectors, Interconnects |
| Manufacturer: | ASSMANN WSW Components |
| Short Description: | TERMINAL BLOCK |
| More Detail: | 5 Position Wire to Board Terminal Block 45° (135°)... |
| DataSheet: |  A-TB750-HG05 Datasheet/PDF |
| Quantity: | 1000 |
| 800 +: | $ 0.81837 |
| Mounting Type: | Through Hole |
| Screw Thread: | -- |
| Torque - Screw: | -- |
| Screw Material - Plating: | -- |
| Clamp Material - Plating: | Steel, Stainless |
| Contact Material - Plating: | Brass |
| Housing Material: | Thermoplastic |
| Operating Temperature: | -40°C ~ 115°C |
| Color: | Gray |
| Features: | Interlocking (Side) |
| Wire Termination: | Screwless |
| Series: | A-TB750 |
| Wire Gauge: | 12-28 AWG |
| Voltage: | 300V |
| Current: | 15A |
| Mating Orientation: | 45° (135°) Angle with Board |
| Pitch: | 0.295" (7.50mm) |
| Positions Per Level: | 5 |
| Number of Levels: | 1 |
| Part Status: | Active |
| Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Terminal Blocks - Wire to Board:
A-TB750-HG05 is a type of wire to board connection terminal block. These blocks are mainly used to connect wires to an electrical circuit board or printed circuit board. They also provide secure and reliable electrical connections between two or more wires, and they are widely used for both commercial and industrial applications.
A-TB750-HG05 has a wide variety of application fields, such as: automotive, computer and consumer electronics, manufacturing, laboratory equipment, medical equipment, power and security systems, telecommunications, and much more. Additionally, they are suitable in hazardous environments, because of their ability to provide secure and reliable connections to cables and wires that are not traditional wiring.
The working principle of A-TB750-HG05 is simple and straightforward. A terminal block consists of two or more terminal plates that are connected together. The terminal plates have two levels of pins, where the pins with a lower level are used to connect the cables to the printed circuit board. The other pins with a higher level are used to provide the connection between the different cables.
The electrical connection between the cables and the printed circuit board is usually secured through a compression clamp or a wedge-type connection. In case of a wedge-type connection, the wedge is placed between the two terminal plates and an electrical signal is then transmitted through conductive pins through the terminal block.
The terminal block allows for high current capacity, which in industrial applications can reach up to 30A, and is also suitable for temperature range up to 350°C. Additionally, it is available in multiple colors and is easily identified with its bright color.
A-TB750-HG05 is a convenient and reliable way to connect two or more circuits. It eliminates the need to solder connections and is user-friendly in terms of installation and maintenance. It is also very cost effective and provides a secure and reliable connection for long-term uses.
The specific data is subject to PDF, and the above content is for reference
TERM BLOCK RISING CLAMP 19POS19 Position...
TERMINAL BLOCK 23POS 5.08MM SIDE23 Posit...
TERMINAL BLK 4POS 5MM VERT GRN4 Position...
TERM BLOCK RCPT WIRE 19POS R/A19 Positio...
TERM BLOCK RCPT 2POS VERT 7.5MM2 Positio...
TERM BLOCK RCPT 25POS VERT 3.5MM25 Posit...