Allicdata Part #: | ABL-20.000MHZ-B1U-T-ND |
Manufacturer Part#: |
ABL-20.000MHZ-B1U-T |
Price: | $ 0.21 |
Product Category: | Crystals, Oscillators, Resonators |
Manufacturer: | Abracon LLC |
Short Description: | CRYSTAL 20.0000MHZ 18PF T/H |
More Detail: | 20MHz ±10ppm Crystal 18pF 40 Ohms HC-49/US |
DataSheet: | ABL-20.000MHZ-B1U-T Datasheet/PDF |
Quantity: | 1000 |
1000 +: | $ 0.18900 |
Series: | ABL |
Packaging: | Tape & Reel (TR) |
Part Status: | Active |
Type: | MHz Crystal |
Frequency: | 20MHz |
Frequency Stability: | ±10ppm |
Frequency Tolerance: | ±10ppm |
Load Capacitance: | 18pF |
ESR (Equivalent Series Resistance): | 40 Ohms |
Operating Mode: | Fundamental |
Operating Temperature: | -20°C ~ 70°C |
Ratings: | -- |
Mounting Type: | Through Hole |
Package / Case: | HC-49/US |
Size / Dimension: | 0.453" L x 0.197" W (11.50mm x 5.00mm) |
Height - Seated (Max): | 0.138" (3.50mm) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Crystals have long been used in electronic and electrical applications, from watches and clocks, to radios and computers. ABL-20.000MHZ-B1U-T is a type of crystal oscillator, a device used to generate an electrical signal with a very precise frequency. It is commonly used in radio receivers, computers, and other precision timing applications, such as GPS systems, cell phones and timing circuits.
The ABL-20.000MHZ-B1U-T crystal oscillator is a 4-pin ceramic package containing two quartz crystals, two capacitors, and two resistors. The two crystals are connected in parallel and mounted on a single quartz plate, known as a “spacer”. The spacer has a “Crystal Prefix” letter code which indicates the type of oscillator. The ABL-20.000MHZ-B1U-T indicates that it is a 20MHz oscillator with a temperature coefficient of -25ppm/+25ppm.
The working principle of the ABL-20.000MHZ-B1U-T crystal oscillator is simple. An alternating voltage is applied to the resonator through the two input pins. The voltage causes the quartz to vibrate at a precise frequency depending on the design and size of the crystal. The alternating output voltage of the resonator is connected to the two output pins of the oscillator via two capacitors. The capacitors block DC voltages and pass only the alternating output frequency. This output is then amplified and used to drive other circuits.
The ABL-20.000MHZ-B1U-T crystal oscillator is widely used in consumer electronics, wireless communication systems and other precision timing applications. In consumer electronics, such as TVs and DVD players, the oscillator is used to maintain a stable frequency reference for the video decoder and audio processing. In mobile phones and wireless communication systems, the oscillator is used to generate the required radio frequency. It can also be used in GPS systems to maintain the required accuracy of timing.
The ABL-20.000MHZ-B1U-T crystal oscillator has numerous advantages over other types of oscillators. It is highly stable and accurate, and can maintain a precise frequency over a wide temperature range. It can be used in a wide range of applications, from consumer electronics to precision timing. It is also relatively small and requires very little power.
In conclusion, the ABL-20.000MHZ-B1U-T crystal oscillator is a highly versatile and accurate device used in a wide range of electronics applications. It has numerous advantages over other types of oscillators, including its accuracy, stability, low power consumption, and small size. It is widely used in consumer electronics, wireless communication systems, and precision timing applications.
The specific data is subject to PDF, and the above content is for reference
Crystal 8.59MHz 39pF 3-Pin CSMD T/R - Ta...
CRYSTAL 52.000 MHZ 12PF SMT52MHz 15ppm C...
CRYSTAL 50.000 MHZ 8PF SMT50MHz 15ppm Cr...
CRYSTAL 48.000 MHZ 8PF SMT48MHz 20ppm Cr...
CRYSTAL 44.000 MHZ 6PF SMT44MHz 20ppm Cr...
CRYSTAL 40.610 MHZ SERIES SMT40.61MHz 15...