Allicdata Part #: | ABL-20.000MHZ-B4Y-T-ND |
Manufacturer Part#: |
ABL-20.000MHZ-B4Y-T |
Price: | $ 0.15 |
Product Category: | Crystals, Oscillators, Resonators |
Manufacturer: | Abracon LLC |
Short Description: | CRYSTAL 20.0000MHZ 18PF T/H |
More Detail: | 20MHz ±30ppm Crystal 18pF 40 Ohms HC-49/US |
DataSheet: | ABL-20.000MHZ-B4Y-T Datasheet/PDF |
Quantity: | 1000 |
1000 +: | $ 0.13860 |
Series: | ABL |
Packaging: | Tape & Reel (TR) |
Part Status: | Active |
Type: | MHz Crystal |
Frequency: | 20MHz |
Frequency Stability: | ±30ppm |
Frequency Tolerance: | ±30ppm |
Load Capacitance: | 18pF |
ESR (Equivalent Series Resistance): | 40 Ohms |
Operating Mode: | Fundamental |
Operating Temperature: | -20°C ~ 70°C |
Ratings: | -- |
Mounting Type: | Through Hole |
Package / Case: | HC-49/US |
Size / Dimension: | 0.453" L x 0.197" W (11.50mm x 5.00mm) |
Height - Seated (Max): | 0.138" (3.50mm) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Crystals Application and Working Principle
Crystals are widely used in various applications, from timing applications in monitors and appliances, to microwave frequency synthesisers. Crystals used in these applications are usually classified as frequency control crystals, resonator crystals and XY crystal oscillators.
ABL-20.000MHZ-B4Y-T
The ABL-20.000MHZ-B4Y-T is a frequency control crystal that is used for oscillator and filter applications. It has a centre frequency of 20.000 MHz and a tolerance of ±50 ppm (parts per million). The oscillator has a low current consumption of 1.3 mA and is suitable for a wide range of operating temperatures, from -40°C to +85°C.
Application Field
The ABL-20.000MHZ-B4Y-T can be used in a variety of applications. The crystal can be used as a clock oscillator in watches, electronic meters, electronic modules and remote sensors. It can also be used as a filter in mobile phones, wireless communication devices and navigation systems.
Working Principle
Crystals are made from quartz, a piezoelectric material. When an electric voltage is applied to a quartz crystal, its quartz element vibrates at an extremely stable frequency. The frequency of the crystal is determined by the shape of the crystal, its size, and the mass of the electrodes attached to its ends. The crystal vibrates at its resonant frequency exactly when a certain combination of electrical and mechanical conditions is achieved. This combination is referred to as the "load capacitance".
The ABL-20.00MHZ-B4Y-T crystal works by setting up an AC electric field across its quartz element. When a voltage is applied to the crystal, an electric field is set up between the two electrodes and this pushes the quartz molecules back and forth. The resonant frequency of the crystal is determined by its physical properties, such as its size, shape and mass of the electrodes.
The frequency of the ABL-20.00MHZ-B4Y-T is controlled by adjusting the load capacitance. This is done by connecting an external capacitor across the two electrodes of the crystal. When the two electrodes are connected with a capacitor, the load capacitance and the resonant frequency changes. The frequency of the crystal is then controlled by varying the value of the load capacitor.
The ABL-20.00MHZ-B4Y-T is widely used in various applications due to its low current consumption, wide operating temperature range and good frequency stability.
The specific data is subject to PDF, and the above content is for reference
Crystal 8.59MHz 39pF 3-Pin CSMD T/R - Ta...
CRYSTAL 52.000 MHZ 12PF SMT52MHz 15ppm C...
CRYSTAL 50.000 MHZ 8PF SMT50MHz 15ppm Cr...
CRYSTAL 48.000 MHZ 8PF SMT48MHz 20ppm Cr...
CRYSTAL 44.000 MHZ 6PF SMT44MHz 20ppm Cr...
CRYSTAL 40.610 MHZ SERIES SMT40.61MHz 15...