ABL-48.000MHZ-B2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Crystals are used in a wide array of applications. From oscillators to signal processors, they are important components in almost any electronic device. While some applications require more power, others require high precision and accuracy. In any case, one type of crystal that has been used in many applications is the ABL-48.000MHZ-B2. This article will discuss the application field and working principle of this type of crystal.

The ABL-48.000MHZ-B2 crystal is a low frequency Bluetooth crystal oscillator, designed for use in Bluetooth Low Energy (BLE) applications. In particular, it is well-suited for use in communication, location and data transfer solutions. The BLE standard is based on the IEEE 802.15.1 specification, with modifications to enable low power communication in devices such as sensors, actuators and beacons. The ABL-48.000MHZ-B2 is the only crystal available with operating frequencies up to 48MHz, which allows for satisfactory performance when compared to the nRF51822 and TI CC2541 solutions. In addition, it can be used in solutions that require a wide band frequency range.

In addition to Bluetooth, the ABL-48.000MHZ-B2 is also suitable for a variety of other low-power applications. It can be used for general-purpose solutions, such as toys, remote controls, wearables and medical devices, as well as for automotive solutions, such as infotainment systems, navigation and tracking systems, and vehicle safety systems. It is also suitable for wireless audio solutions, wireless chargers, and low-power wireless communication solutions.

The ABL-48.000MHZ-B2 crystal is a piezoelectric device, which consists of a quartz crystal and two electrodes. The quartz crystal is cut and polished carefully to form two surfaces with a constant gap between them. The two electrodes are applied to the crystal, causing an electric field to form across the gap. This electric field causes the quartz crystal to oscillate, producing a very precise and stable frequency. In the case of the ABL-48.000MHZ-B2, the frequency is 48MHz, with a tolerance of ±200ppm.

When the oscillator is used in an application, the crystal resonates with an external fixed-frequency circuit. An external capacitor on the oscillator circuit helps to maintain the desired frequency. The crystal can also be used in an amplitude modulation circuit, allowing it to be used for narrowband communication applications. The oscillator output can be connected to an amplifier, allowing the crystal to be used in radio frequency applications.

The ABL-48.000MHZ-B2 crystal is a low frequency Bluetooth crystal oscillator, designed for use in Bluetooth Low Energy (BLE) applications. In addition to Bluetooth, it is also suitable for a variety of other low-power applications, such as toys, remote controls, wearables and medical devices, as well as automotive solutions, wireless audio solutions and low-power wireless communication solutions. It is a piezoelectric device, consisting of a quartz crystal and two electrodes, with a frequency of 48MHz, and a tolerance of ±200ppm. Its oscillator output can be connected to an amplifier, allowing it to be used for radio frequency applications, as well as for amplitude modulation applications.

The specific data is subject to PDF, and the above content is for reference