ABM10W-24.5454MHZ-6-K2Z-T3

Series:	ABM10W
Packaging:	Tape & Reel (TR)
Part Status:	Active
Type:	MHz Crystal
Frequency:	24.5454MHz
Frequency Stability:	±50ppm
Frequency Tolerance:	±20ppm
Load Capacitance:	6pF
ESR (Equivalent Series Resistance):	100 Ohms
Operating Mode:	Fundamental
Operating Temperature:	-40°C ~ 125°C
Ratings:	--
Mounting Type:	Surface Mount
Package / Case:	4-SMD, No Lead
Size / Dimension:	0.098" L x 0.079" W (2.50mm x 2.00mm)
Height - Seated (Max):	0.024" (0.60mm)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

ABM10W-24.5454MHZ-6-K2Z-T3: CrystalsCrystals are widely used in communication applications such as wireless networking, cellular phones, satellite television, and etc. It is one of the most important components in the design of miniaturized high-performance communication systems. Crystals have properties that make them attractive to receiver and transmitter designs in terms of performance and cost. ABM10W-24.5454MHZ-6-K2Z-T3 crystal is an example of specific crystal, which is designed for frequency control applications. This crystal is widely used in electronics communication applications. This crystal takes advantage of an advanced design and fabrication technology to achieve exceptional frequency, stability and low-cost performance. The ABM10W-24.5454MHZ-6-K2Z-T3 crystal is made up of six components, namely, a MEMS oscillator (MEMS = micro-electro-mechanical system), a quartz crystal resonator, an amplifier, a feedback resistor, a bias voltage source, and a tuning capacitor. The MEMS oscillator is the heart of the crystal. It is a small, piezoelectric mechanical transducer that can vibrate at a certain frequency. When a voltage is applied to the oscillator, its output frequency is determined by the voltage and mechanical properties of the crystal. The quartz crystal resonator is made of quartz, a naturally occurring mineral. It is a piezoelectric material that vibrates at a specific frequency when a voltage is applied. The crystalline structure of the quartz crystal resonator determines the crystal’s resonance frequency. The amplifier is then used to amplify the signal from the MEMS oscillator and quartz crystal resonator. The signal is then sent to the feedback resistor and bias voltage source. The feedback resistor and bias voltage source are the components that control the output frequency of the crystal. Finally, the tuning capacitor is used to adjust the output frequency of the crystal. The capacitor acts as an adjustable resistor, allowing the user to fine-tune the output frequency of the crystal. This is important as it allows the user to adjust the crystal to match a desired frequency. In conclusion, the ABM10W-24.5454MHZ-6-K2Z-T3 crystal is a highly advanced and highly accurate frequency-control device. It is ideal for use in high-performance communication systems that require reliable frequency accuracy. The components of the crystal, including the MEMS oscillator, the quartz crystal resonator, the amplifier, the feedback resistor, the bias voltage source, and the tuning capacitor, all work together to create a reliable and accurate frequency-control device.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description