ABM11W-38.8800MHZ-6-D2X-T3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Crystals are used in a wide variety of applications, from cellular phones and computers to automotive electronics and medical electronics. ABM11W-38.8800MHZ-6-D2X-T3crystals are commonly used for electronic timing, signal generation, and data transmission applications. This article will explain the application field and working principle of this crystal.

Overview of ABM11W-38.8800MHZ-6-D2X-T3 Crystals

ABM11W-38.8800MHZ-6-D2X-T3 crystals are quartz timing devices with a center frequency of 38.8800 MHz, with the exact frequency capable of adjustment over a limited range. The device has a maximum frequency deviation of 25-100 ppm (parts per million) over a life span of 50-100 million cycles. It has a low frequency stability, with a maximum frequency deviation of as little 2.5 ppm when stored in optimal conditions.

ABM11W-38.8800MHZ-6-D2X-T3 crystals are designed for low-power, low-noise applications. They are available in packages ranging from 3.2 x 2.5 mm to 5.0 x 3.2 mm and are typically mounted on printed circuit boards. They are also protected by a hermetic seal to prevent moisture and dust from entering.

Applications of ABM11W-38.8800MHZ-6-D2X-T3 Crystals

ABM11W-38.8800MHZ-6-D2X-T3 crystals are used in a variety of applications, including:

• Wireless communication systems
• Portable electronic devices
• Data loggers
• Airborne radio navigation systems
• Radar systems
• Communications systems
• High-frequency oscillators
• Tracking systems
• Medical equipment

In addition to these applications, ABM11W-38.8800MHZ-6-D2X-T3 crystals are also used in consumer electronics, such as digital cameras, camcorders, and MP3 players. They are ideal for use in low power, low noise applications where the timing accuracy of the device must be maintained over time.

Working Principle of ABM11W-38.8800MHZ-6-D2X-T3 Crystals

ABM11W-38.8800MHZ-6-D2X-T3 crystals consist of two pieces of quartz cut at different angles. When the pieces are connected, an electric current is passed through the crystals which causes them to vibrate at a specific frequency. The frequency of the vibration is determined by the orientation and size of the quartz pieces. As the quartz pieces vibrate, they generate electrical signals which can be used for timing and data transmission applications.

The frequency of the ABM11W-38.8800MHZ-6-D2X-T3 crystal is also affected by temperature. As the temperature increases, the frequency of the device decreases. To maintain the accuracy of the crystal, temperature compensation circuitry is used to adjust the frequency of the crystal when the temperature changes.

Conclusion

ABM11W-38.8800MHZ-6-D2X-T3 crystals are commonly used for timing, signal generation, and data transmission applications. They are used in a variety of applications, ranging from communications systems to medical equipment. The crystals use two pieces of quartz to vibrate at a specific frequency, which can be affected by temperature. Temperature compensation circuitry is used to maintain the accuracy of the crystal.

The specific data is subject to PDF, and the above content is for reference