ABM12W-48.0000MHZ-7-B1U-T3 Crystals, Oscillators, Resonators

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Crystals are vital components in most electronic components for oscillation, fine timing and energy maintenance in the electrical signals. ABM12W-48.0000MHZ-7-B1U-T3 is a type of crystal with wide applications in electronic devices. It is often used to generate high frequency clocks for digital systems. It consists of four components: frequency, size, stability, and tolerance. This paper will discuss the application field and working principle of ABM12W-48.0000MHZ-7-B1U-T3.

ABM12W-48.0000MHZ-7-B1U-T3 crystal has a frequency of 48MHz, with a tolerance of ± 7ppm (parts-per-million). While 48 MHz is the measured frequency of the crystal, the actual frequency is almost always higher than this number. The ABM12W size means it has an overall size of 12.5 x 9.7 x 2.9mm. ABM12W-48.0000MHZ-7-B1U-T3 has a very good short term and long term stability, making it suitable for use in many electronic applications.

The ABM12W-48.0000MHZ-7-B1U-T3 is a popular choice for a wide range of electronic devices due to its stability and frequency accuracy. It’s commonly used in radio frequency (RF) receivers and transmitters for frequency synthesis, in digital converters for oscillators, for RTC (real-time clocks), and in IoT (Internet of Things) devices. It’s also a popular choice for medical imaging and industrial machines that work with high precision.

The ABM12W-48.0000MHZ-7-B1U-T3 works in a similar way to other crystals. It has an oscillator circuit in which a piezoelectric crystal is embedded between two metal electrodes. The crystal is made of quartz and when voltage is applied across the electrodes, it vibrates at a very precise frequency. This frequency is then amplified and sent out to where it’s required.

In order to obtain an accurate frequency from the ABM12W-48.0000MHZ-7-B1U-T3, the oscillator circuit must be tuned. This tuning is typically done manually, though some oscillators can be tuned in an automated fashion. The process involves adjusting the feedback resistor, capacitors and inductor in the oscillator circuit to optimize the resonant frequency of the crystal for the desired application. Once the oscillator is tuned, it should perform reliably.

In summary, ABM12W-48.0000MHZ-7-B1U-T3 crystal is a widely used oscillator in many electronic applications because of its stability and frequency accuracy. Its small size makes it suitable for applications in medical imaging and industrial machines. The crystal works by vibrating at a very precise frequency when voltage is applied across its electrodes, and must be tuned in order to obtain accurate frequency readings.

The specific data is subject to PDF, and the above content is for reference