ABM3-20.000MHZ-B2-T

Series:	ABM3
Packaging:	Tape & Reel (TR)
Part Status:	Active
Type:	MHz Crystal
Frequency:	20MHz
Frequency Stability:	±50ppm
Frequency Tolerance:	±20ppm
Load Capacitance:	18pF
ESR (Equivalent Series Resistance):	30 Ohms
Operating Mode:	Fundamental
Operating Temperature:	-20°C ~ 70°C
Ratings:	--
Mounting Type:	Surface Mount
Package / Case:	2-SMD, No Lead
Size / Dimension:	0.197" L x 0.126" W (5.00mm x 3.20mm)
Height - Seated (Max):	0.051" (1.30mm)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Crystals: ABM3-20.000MHZ-B2-T Application Field and Working Principle

Crystals are a type of quartz crystal resonator which are used for frequency control in a variety of applications. An ABM3-20.000MHZ-B2-T crystal is one such type of crystal that is used in the frequency control of electronic circuit boards and equipment. This article will discuss the application field and working principle of ABM3-20.000MHZ-B2-T crystals.ABM3-20.000MHZ-B2-T crystals are primarily used in the frequency control of electronic circuit boards and equipment, such as televisions, radios, cell phones, and other electronic devices. They are used in a variety of applications, including frequency synthesizers, mobile antennas, communication equipment, and radar systems. The frequency of the crystal is usually fixed, usually within the range of 4.00 to 20.000 MHz.The working principle of an ABM3-20.000MHZ-B2-T crystal is based on the concept of resonance, which is the ability of an object to vibrate with greater amplitude when the frequency of the source of vibration matches its natural frequency. A quartz crystal consists of a thin slice of quartz that is cut in such a way that its natural frequency is within the required frequency range. A drive signal is then applied to the crystal, which causes it to vibrate at its natural frequency. The vibrating crystal creates an oscillation that is used to control the frequency of the device in which it is used.The frequency of an ABM3-20.000MHZ-B2-T crystal is determined by the material from which it is made, its size and shape, and the type of drive signal that is applied to it. The type of drive signal is usually either a square wave or a sinusoidal wave. The crystal is usually mounted on a ceramic substrate, which helps to reduce the vibration of the crystal. Other substrates, such as gallium arsenide (GaAs) and gallium phosphide (GaP) can also be used.The advantages of using ABM3-20.000MHZ-B2-T crystals are that they are relatively inexpensive, they are very small and easy to mount, they are very reliable, and they can provide very precise frequency control. They also have very low jitter, which is a measure of the amount of variation in the oscillation period. Furthermore, they can be used in a wide range of applications, such as in cellular phones, TV and radio receivers, satellite receivers, radar systems, and other electronic devices.In conclusion, ABM3-20.000MHZ-B2-T crystals are a type of quartz crystal resonator used for frequency control in a variety of applications. They are primarily used in the frequency control of electronic circuit boards and equipment, and are usually mounted on a ceramic substrate. The frequency of the crystal is usually fixed and can range from 4.00 to 20.000 MHz. The advantages of using this type of crystal are that they are very reliable and provide very precise frequency control.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description