ABM8AIG-14.31818MHZ-12-2-T3

Series:	ABM8AIG
Packaging:	Tape & Reel (TR)
Part Status:	Active
Type:	MHz Crystal
Frequency:	14.31818MHz
Frequency Stability:	±100ppm
Frequency Tolerance:	±20ppm
Load Capacitance:	12pF
ESR (Equivalent Series Resistance):	100 Ohms
Operating Mode:	Fundamental
Operating Temperature:	-40°C ~ 125°C
Ratings:	AEC-Q200
Mounting Type:	Surface Mount
Package / Case:	4-SMD, No Lead
Size / Dimension:	0.126" L x 0.098" W (3.20mm x 2.50mm)
Height - Seated (Max):	0.032" (0.80mm)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Crystals: ABM8AIG-14.31818MHZ-12-2-T3 Application Field and Working Principle

Crystals are widely used in a variety of applications to tune or generate radio frequencies (RF) signals. Crystals can also be used to alter the frequency of signals such as for electrical noise reduction and encoding. The ABM8AIG-14.31818MHZ-12-2-T3 is a type of crystal that is used in a variety of applications such as communication, control, and measurement. This article will discuss the application fields and working principle of ABM8AIG-14.31818MHZ-12-2-T3.The ABM8AIG-14.31818MHZ-12-2-T3 is a quartz crystal that has an amplitude of 14.31818 MHz. This crystal provides very accurate timing signals on a wide range of frequencies. The ABM8AIG-14.31818MHZ-12-2-T3 can be used in a variety of applications such as in radios, televisions, navigation systems, and other electronic devices. The crystal can be used to generate, modulate, and filter signals.The ABM8AIG-14.31818MHZ-12-2-T3 is a crystal oscillator circuit which has the following parts: input, feedback loop, and output. The input is the electrical energy that is used to drive the oscillator. The output is the signal that is generated from the oscillator circuit. The feedback loop is used to control the frequency and amplitude of the output signal. The feedback loop consists of an amplifier, a capacitor, and a quartz crystal or crystal oscillator. The amplifier is used to control the output voltage level and the capacitor and the crystal oscillator-together form the resonate to maintain the frequency of the output signal.The ABM8AIG-14.31818MHZ-12-2-T3 is composed of quartz crystal cut precisely to a specific frequency and is mounted in a hermetically sealed casing. The quartz crystal is piezoelectic material and it responds to electrical signals. When an alternating voltage is applied to the quartz crystal, it expands and contracts, causing the frequency of the signal to be changed. The quartz crystal is made of two plates that are connected by a central piece, which is referred to as the frame. When an alternating voltage is applied to the ABM8AIG-14.31818MHZ-12-2-T3, the crystal vibrates at the same frequency. As these vibrations increase, the frequency of the signal increases. This allows the crystal to be used in oscillator and filter circuits. The crystal can also be used in oscillator circuits due to its ability to maintain a steady frequency throughout its operating range. The crystal can be used in modulators and encoders as it can be programmed and changed for different applications. The ABM8AIG-14.31818MHZ-12-2-T3 has a frequency range of 14.31818 MHz and can be used for a variety of applications. It is widely used in communication and control, such as in mobile phones, radios, TV, GPS and other devices. The crystal is also used in measurement instruments, such as in frequency counters, wireless remote control systems, and electronic testing instruments. The crystal can also be used in digital audio equipment, navigation systems, computer equipment, and so on. The ABM8AIG-14.31818MHZ-12-2-T3 is a precise timing component that is widely used in many electronic products and is important to electronic systems. In conclusion, the ABM8AIG-14.31818MHZ-12-2-T3 is a quartz crystal that is used in a variety of applications. It has an amplitude of 14.31818 MHz and is composed of quartz cut to a precise frequency and mounted in a metal casing. The crystal is used in a variety of communication, control, and measurement systems. The crystal is used to generate, modulate, and filter signals, and it can also be used in oscillator and filter circuits. The ABM8AIG-14.31818MHZ-12-2-T3 is an important component in many electronic systems and provides precise timing signals to a wide range of frequencies.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description