ABM8G-12.000MHZ-18-D2Y-T3

Crystals are a type of passive component that are used to provide time, stepping, or frequency control in circuits. The most common types of crystals commonly used in these types of applications are quartz and ceramic. One example of a commonly used crystal is the ABM8G-12.000MHZ-18-D2Y-T3.

The ABM8G-12.000MHZ-18-D2Y-T3 crystal, like other crystals, provides a stable frequency that can be used as a reference for control circuits requiring tight frequency control. This crystal can be used in a variety of applications such as: Analog and Digital Clock Generation, Audio Frequency Oscillators, Digital Video Applications, Frequency Synthesizers, Measurement, Alert, and Warning System, and Embedded Networking Applications.

The ABM8G-12.000MHZ-18-D2Y-T3 crystal is a commonly used quartz crystal that is approximately 12.000 MHz. The oscillator circuit is programmed by the crystal frequency in order to maintain a stable frequency. The crystal is hermetically sealed in a package in order to protect it from environmental factors that may cause it to frequency drift. The oscillator circuit is also designed to maintain a predictable frequency despite changes in temperature and voltage.

Crystals are typically fabricated using a pair of quartz plates coated with metal electrodes. When one metal plate is vibrated at a specific frequency, it excites the attached quartz plate. The quartz plate then vibrates at the same frequency, producing an output signal at that frequency. Due to the properties of quartz, the frequency at which a crystal will vibrate can be precisely programmed by the metal electrodes on each plate.

The ABM8G-12.000MHZ-18-D2Y-T3 crystal is configured as a 3-port device and is composed of two metal plates, one used for input and the other used for output. It is held together between the two metal plates by a dielectric material such as glass or ceramic, which is used to reduce the effect of capacitive coupling between the two plates. The input port typically has an impedance of 10kΩ while the output port has an impedance of 100Ω.

The ABM8G-12.000MHZ-18-D2Y-T3 is a temperature stabilized crystal and features a wide temperature range from -40°C to 85°C. It also has a low power consumption of only 3.3V, making it suitable for low power applications. This crystal also features a fast startup time of only 20 Microseconds, making it ideal for use in applications requiring fast response times.

The ABM8G-12.000MHZ-18-D2Y-T3 crystal is a widely used component for applications requiring a precise and stable frequency. It is ideal for use in digital, audio, and embedded networking applications and can be used to provide time, stepping, or frequency control. The fast startup time, low power consumption, and wide temperature range make it an ideal choice for a variety of applications.