ABM8G-30.000MHZ-4Y-T3 Crystals, Oscillators, Resonators

Series:	ABM8G
Packaging:	Tape & Reel (TR)
Part Status:	Active
Type:	MHz Crystal
Frequency:	30MHz
Frequency Stability:	±30ppm
Frequency Tolerance:	±30ppm
Load Capacitance:	10pF
ESR (Equivalent Series Resistance):	50 Ohms
Operating Mode:	Fundamental
Operating Temperature:	-10°C ~ 60°C
Ratings:	--
Mounting Type:	Surface Mount
Package / Case:	4-SMD, No Lead
Size / Dimension:	0.126" L x 0.098" W (3.20mm x 2.50mm)
Height - Seated (Max):	0.039" (1.00mm)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Crystals

Crystals, typically consisting of elements such as silicon, quartz, and aluminum, are used as electrical components in a wide range of electronics. They act as a conductor to transfer and amplify different types of electrical signal in the form of oscillation. Crystals are used to create many signal types, including low-frequency (LF) signals, radio-frequency (RF) signals, and intermediate-frequency (IF) signals, and can be seen in applications such as digital watches, telephones and television sets.Among the myriad of types of crystals commonly used, one of the most popular ones is the ABM8G - 30.000MHZ-4Y-T3 crystal. These crystals have a wide range of applications, ranging from basic frequency generation to accurate timing and frequency control. They are most commonly used for the generation of various clock and timing signals, such as those found in microcontrollers, servers and personal computers.

ABM8G-30.000MHZ-4Y-T3 Application Field And Working Principle

The ABM8G-30.000MHZ-4Y-T3 crystal is an example of a quartz crystal resonator. Quartz is composed of silicon and oxygen, and the type of crystal used usually depends on the application it is used for. For example, the ABM8G-30.000MHZ-4Y-T3 crystal is primarily used for the generation of clock and timing signals, as its frequency and stability are particularly suited to creating accurate timing signals.The resonance circuit of quartz crystal is illustrated in the figure. The ABM8G-30.000MHZ-4Y-T3 crystal consists of two electrodes mounted on a quartz crystal, which is placed between them. The electrodes are connected respectively to the two current-carrying wires that, when connected to a voltage source, create a small electrical current. This current flows through the quartz crystal and causes it to vibrate at a certain frequency determined by the properties of the quartz crystal. This frequency, known as the "resonant" frequency, can be used to generate clock and timing signals with an extremely high degree of accuracy and stability.The frequency can be calculated using the following equation:f = 1/(2π√LC)where L is the inductance across the crystal, and C is the capacitance. It is also possible to adjust the frequency by changing either the parallel capacitance or series inductance of the crystal.In addition, the ABM8G-30.000MHZ-4Y-T3 crystal has a temperature coefficient of -30.000PPM/Co, meaning its frequency varies by -30.000 parts-per-million (PPM) for every degree Celsius change in temperature. This means that the crystal can remain stable enough in temperature-sensitive applications despite ambient temperature fluctuations.The ABM8G-30.000MHZ-4Y-T3 crystal is a reliable and cost-effective solution for applications that require precise frequency control and stability. Due to its wide range of applications in microcontroller and server designs, the ABM8G-30.000MHZ-4Y-T3 crystal has become a popular choice among engineers and designers alike.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description