ABM8W-13.0000MHZ-8-D1X-T3

Series:	ABM8W
Packaging:	Tape & Reel (TR)
Part Status:	Active
Type:	MHz Crystal
Frequency:	13MHz
Frequency Stability:	±20ppm
Frequency Tolerance:	±10ppm
Load Capacitance:	8pF
ESR (Equivalent Series Resistance):	100 Ohms
Operating Mode:	Fundamental
Operating Temperature:	-40°C ~ 85°C
Ratings:	--
Mounting Type:	Surface Mount
Package / Case:	4-SMD, No Lead
Size / Dimension:	0.126" L x 0.098" W (3.20mm x 2.50mm)
Height - Seated (Max):	0.030" (0.75mm)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Crystals, which are a form of piezoelectric materials, can be found in many different types of industrial, technological and even consumer applications. The ABM8W-13.0000MHZ-8-D1X-T3 crystal is a high frequency crystal and a commonly used one at that. This article will discuss its application and working principle.ABM 8w-13.0000MHZ-8-D1X-T3 is a ceramic crystal unit with a surface mount package. This type of crystal has a high frequency tolerance and good quality factor. It is an extremely important component in many electronics and communication systems in which signal frequency control is important. One of the most common applications for the ABM8W-13.0000MHZ-8-D1X-T3 is in radio wireless systems, particularly in systems operating from 8.5 to 10GHz. This type of crystal is used in these systems because it is able to accurately match the operational frequency of the transceiver. The specification of these crystals must be closely matched to that of the system, as mismatching can lead to poor system performance or even system failure.Other common uses of the ABM 8w-13.0000MHZ-8-D1X-T3 is in frequency synthesis systems. This type of frequency synthesis is performed by switching the crystals in a multiplex mode to form a wide bandwidth of frequencies. This is often used in wireless communication systems operating in the 900MHz frequency band.Besides wireless systems, the ABM 8w-13.0000MHZ-8-D1X-T3 is also used in frequency detection applications. Frequency detection is a process in which a signal is monitored to detect any changes in frequency. These changes can be caused by interference or malfunction in a given system, as well as any external factors.The ABM 8w-13.0000MHZ-8-D1X-T3 works by converting electrical energy into mechanical energy and vice versa. This type of crystal consists of two slabs of quartz sandwiched together with electrodes on either side. When voltage is applied to this crystal, it vibrates at the frequency determined by the distance between the two slabs of quartz. This mechanical vibration can then be converted into a electrical signal, which can be used in any frequency related application. Apart from its use in radio systems and frequency detection applications, some crystals such as the ABM 8w-13.0000MHZ-8-D1X-T3 can also be used as timing components in computers. The ABM 8w-13.0000MHz-8-D1X-T3 crystal is very precise and reliable, so it is often used in computers for timing purposes.In conclusion, the ABM 8w-13.0000MHZ-8-D1X-T3 is a high frequency ceramic crystal unit that is extensively used in wireless systems, frequency detection and frequency synthesis applications, as well as for timing in computers. It works by converting electrical energy into mechanical energy and vice versa, allowing it to provide reliable and accurate frequency control. It is an important component in many electronics and communication systems, and its use has a wide range of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description