ABM8W-13.0000MHZ-8-K2Z-T3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Crystals are frequently used in various electrical and electronic systems, especially in oscillator circuits, due to their low cost, small size, and low impedance in the frequency range of 10 MHz to 10 GHz. Crystals are very efficient at producing a tightly controlled frequency, with a near-perfect sine wave output. ABM8W-13.0000MHZ-8-K2Z-T3 is one such type of crystal.

ABM8W-13.0000MHZ-8-K2Z-T3 crystals are commonly used in oscillators, radio frequency applications, and crystal radio receivers. All of these applications require an extremely precise frequency for optimal performance. The ABM8W-13.0000MHZ-8-K2Z-T3 crystal is designed to provide an accurate, stable frequency for these uses. It is a precision-cut, thin-resistive, and tight tolerance crystal with a frequency range of 13.0000 MHz ±3.5 ppm.

The ABM8W-13.0000MHZ-8-K2Z-T3 crystal is encased in a standard, 8-pin dual-in-line configuration which makes the crystal easy to install in any electronic circuit. In oscillator circuits, a quartz crystal is used in combination with an amplifier and a feedback circuit. With this configuration, an input signal is amplified and fed back to the quartz crystal, which then vibrates at a particular resonant frequency. This resonant frequency is the frequency of the output signal.

In radio applications, ABM8W-13.0000MHZ-8-K2Z-T3 crystals are used in place of expensive, bulky inductors and capacitors to form very stable filters. The crystal acts as an LC circuit, creating a bandpass filter with a high Q factor and very low loss. This allows for a very precise frequency selection, with minimal distortion and noise, resulting in clear audio signal reception.

ABM8W-13.0000MHZ-8-K2Z-T3 crystals are also used in crystal radio receivers. A crystal radio receiver is a simple, low-power radio receiver which uses the resonant properties of a crystal to tune in a particular frequency. In a crystal radio, the crystal filters out interfering frequencies and produces an amplified signal from the desired frequency. The amplified signal can then be used to drive a loudspeaker or headphone for sound reproduction.

The ABM8W-13.0000MHZ-8-K2Z-T3 crystal is a type of quartz crystal which is used in a number of electrical and electronic systems, from oscillator circuits to radio and crystal radio receivers. It is a precision-cut, thin-resistive, and tight tolerance crystal with a frequency range of 13.0000 MHz ±3.5 ppm. Its 8-pin dual-in-line configuration makes the crystal easy to install in any electronic circuit, and its stable frequency allows it to be used in a variety of applications, from filters to crystal radios.

The specific data is subject to PDF, and the above content is for reference