ABM8W-37.0500MHZ-7-J1Z-T3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Crystals, both inorganic and organic, have been used for decades as components for electronic circuits in a variety of applications. Ceramic resonators, quartz crystals, and piezoelectric crystals, have all been used in creating high frequency oscillators where reliable frequency stability is paramount. The ABM8W-37.0500MHZ-7-J1Z-T3 crystal is one such example.

In the case of the ABM8W-37.0500MHZ-7-J1Z-T3 crystal, it has a frequency of 37.0500 MHz and is a seven pin device. The metal lid allows a very small space between the substrate and lid. This small space allows for excellent frequency stability as a metal is a much better conductor than air, and thus allows for better design of the oscillator circuit. This loop also increases the Q factor of the crystal, which is used to measure the purity of the oscillator.

The most common application field of the ABM8W-37.0500MHZ-7-J1Z-T3 crystal is in radio communications, specifically in frequency synthesisers and local oscillator circuits. Synthesizers use a sequence of frequencies to generate radio signals with certain attributes, such as frequency accuracy and low phase noise. Local oscillator circuits require a constant output frequency to mix down incoming signals to obtain maximum sensitivity. Both these applications require finding components that offer a reliable frequency stability whilst generating the required output power.

As any oscillator circuit requires three elements to create a stable noise free output, the ABM8W-37.0500MHZ-7-J1Z-T3 quartz crystal is used for the third and crucial element. The three elements include an amplifier, a feedback network and the crystal. The crystal in this oscillator circuit resonates vibrations at a fixed frequency, and the amplifier and feedback network interact to produce a stable frequency and high Q factor, which is robust against external influences.

A quartz crystal works by a piezoelectric effect, which is an electrical charge developed along surface areas of a crystal when mechanical pressure is applied. In this particular crystal, the application of voltage across the crystal surface causes the crystal to vibrate at 37.0500MHz and the amplitude of the resonance can be controlled by the amplifier.

ABM8W-37.0500MHZ-7-J1Z-T3 quartz crystals are widely available and, due to their small size, are also relatively inexpensive. Additionally, due to their accurate frequency output, quartz crystals are more efficient than many other alternatives, such as ceramic resonators, in many applications. The robustness and inexpensive nature of the ABM8W-37.0500MHZ-7-J1Z-T3 quartz crystal also make it a popular choice for many manufacturers and designers alike.

The specific data is subject to PDF, and the above content is for reference