ABM8W-50.0000MHZ-8-K2Z-T3

Series:	ABM8W
Packaging:	Tape & Reel (TR)
Part Status:	Active
Type:	MHz Crystal
Frequency:	50MHz
Frequency Stability:	±50ppm
Frequency Tolerance:	±20ppm
Load Capacitance:	8pF
ESR (Equivalent Series Resistance):	50 Ohms
Operating Mode:	Fundamental
Operating Temperature:	-40°C ~ 125°C
Ratings:	--
Mounting Type:	Surface Mount
Package / Case:	4-SMD, No Lead
Size / Dimension:	0.126" L x 0.098" W (3.20mm x 2.50mm)
Height - Seated (Max):	0.030" (0.75mm)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Crystals: ABM8W-50.0000MHZ-8-K2Z-T3 Application Field and Working Principle

Crystals are a type of electrical component which are widely used in a broad range of electronic applications. The ABM8W-50.0000MHZ-8-K2Z-T3 (hereafter referred to as ABM8W) is one such crystal, and its primary function is to generate a steady, electrically-accurate frequency for use in so-called ‘ticking’ applications. Examples of such components include microprocessor clocks, digital/analog converters, broadcast tuners, frequency synthesizers and digital filters.A crystal of the type ABM8W is an example of what is known as an oscillator, in that it is a circuit or device designed to generate a steady frequency or signal. Oscillators are often classified according to basic frequency-generating architecture, such as sinusoidal, square wave, triangle wave, sawtooth wave and broadcast radio frequency (RF). ABM8W, however, is what is known as a ‘crystal oscillator’, a type of oscillator that uses the properties of a crystal, rather than an electronic circuit, to generate a specific oscillation frequency, typically within a range of 10’s to 1000’s of megahertz.The physical configuration of an ABM8W crystal comprises a metallic-based package, similar in appearance and form factor to a conventional integrated circuit, in which a small quartz crystal is embedded. The quartz crystal is held within the metallic package in such a way as to form an electrical configuration known as an ‘oscillator circuit’. When connected to an appropriate external oscillating device, the electrical charge within the crystal will oscillate at a very specific frequency when excited by an external electric field - the frequency of oscillation of the crystal being determined by its physical properties.The ABM8W crystal has been specially designed to produce a frequency of 50.0000MHz. This frequency has been engineered to allow the crystal to be used in digital \'ticking\' applications, where a precise, severe accuracy is required - such as in the control of microprocessors, digital signal processors (DSP) and other digital components. Common applications of the ABM8W crystal, therefore, include server boards and network routers, as well as embedded microcontrollers, digital controllers and communication systems. The ABM8W is also used in many laboratory applications, such as spectrum analyzers, frequency counters and signal generators. The application of an ABM8W-50.0000MHZ-8-K2Z-T3 crystal to any given electronics application requires careful consideration of several design parameters. Firstly, the oscillator constructed using an ABM8W crystal must be designed in such a way as to protect the crystal from both electrical and mechanical stress. Secondly, the crystal must be mounted and operated in a way that enables maximum stability and accuracy. Finally, the crystal must be operated over the full-specified temperature range, within electro-magnetic fields, and with a minimum of power dissipation. The \'K2Z-T3\' suffix on the ABM8W-50.0000MHZ-8-K2Z-T3 crystal designation is a unique code assigned by the manufacturer that indicates the design parameters and/or standards employed in the construction of the crystal. The ‘K2Z’ portion of the code refers to the design of the package, in which a ceramic base is used to provide both physical and electrical protection for the quartz crystal. The \'T3\' suffix refers to the particular type of quartz used in the crystal - in this case, a precision quartz designed for very high frequency accuracy.In conclusion, the ABM8W-50.0000MHZ-8-K2Z-T3 crystal is a type of quartz oscillator specifically designed for use in digital ticking applications where extreme accuracy of frequency is required. The crystal has been specifically designed to provide high stability, low power consumption and a small form factor, making it an ideal choice for a wide range of applications. The unique \'K2Z-T3\' suffix indicates the particular design parameters employed in the construction of this crystal, ensuring that the ABM8W-50.0000MHZ-8-K2Z-T3 is an extremely reliable and accurate frequency-generator for its intended application.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description